GE RPWFE Filter: What Fits and When to Replace It
The genuine RPWFE filter for GE refrigerators, with matched models and replacement timing.
Part of our guide: Replacing and maintaining a filter
GE refrigerators that use the RPWFE filter need a new cartridge about every 6 months or 170 to 200 gallons, depending on the model. This guide covers the genuine part (we have not yet verified a compatible one) and lists the models and parts we have matched.
Manufacturer part number. Confirm it matches your model before ordering.
Check price on Amazon (#ad)Certifications: See the manufacturer listing for certifications. Compatibility source: GE Appliances support pages and the GE Amazon listing. No compatible filter listed: GE says a filter without the ID chip will not work.
Last checked October 29, 2026: The genuine filter's ASIN was matched to the stated part number in two independent search sources. We have not listed a compatible filter yet. Fit comes from the manufacturer and reseller listings, not from our own testing, so confirm it against your fridge. Always check the model number printed inside your refrigerator before ordering. See our methodology.
Quick comparison
| OEM | Compatible | |
|---|---|---|
| Product | GE RPWFE genuine | Not listed yet |
| Maker | GE | Third party |
| Replace every | 6 months or 170 to 200 gallons, depending on the model | |
| Certifications | See the manufacturer listing for certifications | |
We have not lab-tested this filter. This table only repeats what the listings state. Read how we work on the methodology page.
Models and parts matched to this filter
How to replace the filter
These steps follow GE’s own support pages for the RPWFE. Your manual is the final word for your exact model.
- Find the filter. GE says it is in the top left corner of the fresh-food section or inside the left refrigerator door.
- Open the filter door, pull on the bottom of the old cartridge and swing it outward. On the blue holder, turn it a quarter turn counterclockwise and pull it out. On the grey holder, gently pull it out once it stops swinging.
- Line up the new cartridge with the word FRONT as GE describes for your holder, push it in until it is fully seated (blue holder: then a quarter turn clockwise until FRONT faces out) and swing it back in. The red indicators should not be visible.
- Check the chip: GE says a genuine RPWFE has a visible ID chip under the label where it says “This side must face inward”, and a filter without the chip will not work.
- Run water through the dispenser to clear air before you drink it.
Sources: GE Appliances: replacing the water filter and GE Appliances: Replace Water Filter or Dispenser Off message.
Frequently asked questions
Which filter fits my refrigerator?
Check the model number on the label inside the fresh-food compartment, or the part number on your current filter. This group covers: RPWFE2PK (2 pack).
Are compatible filters safe?
Look for NSF/ANSI certification on the package. Certification claims vary between sellers, so check the product page before ordering.
How often should I change it?
Every 6 months or 170 to 200 gallons, depending on the model, or sooner if flow drops or water tastes off.
Understanding the GE RPWFE Radio Frequency Chip
The GE RPWFE incorporates an integrated RFID microchip affixed to the back label. If you install an unchipped compatible filter without a factory bypass plug, the refrigerator dispenser control board will flash an ‘ERR’ or ‘Filter Not Found’ code and shut off water flow. When choosing compatible replacements, always verify that the listing includes an active pre-installed chip or provides a reusable bypass adapter.
Next step: Check your refrigerator model in the filter finder.
More on this topic: Replacing a Refrigerator Water Filter: Steps, Timing and Aftercare
Related guides
Browse all refrigerator water filter guides
