How to Reset Your GE Refrigerator Water Filter Light
The filter light on most GE refrigerators resets from the control panel after you install a new cartridge. This guide explains the steps and the filter part numbers to check first.
Part of our guide: Troubleshooting filter problems
The exact button and hold time vary by model, so check your refrigerator manual for the sequence that applies to your unit.
- 1Part on your old filterGE MWFPrinted on the cartridge label
- 2Also sold asMWFP; MWFA; GWF; SmartWaterSame filter, other part numbers or pack sizes
- 3ReplaceEvery 6 months or 300 gallonsSooner if flow slows or taste changes
- 4Before you orderMatch the part numberOn the box or listing: MWF
Before you reset anything, confirm two things: your refrigerator model number and the filter part number it uses. The products below are listed by the part numbers their listings name, so you can match one to your model.
Filters we compared
GE MWF Refrigerator Water Filter
The GE MWF is a genuine replacement filter for select GE French door, side-by-side, and built-in refrigerators, including GE Profile, Café, and Monogram models. GE product page lists NSF/ANSI 42 and 53; the listing says it reduces over 70 impurities such as lead, chlorine, PFOA/PFOS, microplastics, and five trace pharmaceuticals. Installation is tool-free and does not require shutting off the water, and the filter should be replaced every six months. It suits owners of compatible GE refrigerators who want a certified, guaranteed-fit filter.
Reasons to buy
- Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, PFOA/PFOS, microplastics, and select pharmaceuticals
- Guaranteed fit for select GE, GE Profile, Café, and Monogram refrigerators
- Tool-free installation with no water shutoff required
- Six-month filter life with Subscribe & Save option for automatic replacement
Reasons to avoid
- Compatible only with select GE refrigerator models, not universal
- Requires replacement every six months to maintain filtration performance
MARRIOTTO MR9-N Replacement for GE XWFE
This MARRIOTTO filter is a budget-friendly alternative for GE XWFE and XWF refrigerators, complete with the built-in chip that many aftermarket filters lack. The listing states NSF/ANSI 42 (not yet checked by us). A solid pick for owners of compatible GE side-by-side models who want a straightforward replacement.
Reasons to buy
- Built-in chip for compatibility with GE XWFE and XWF systems
- The listing states NSF/ANSI 42 (not yet checked by us).
- Tool-free, leak-proof installation
- Compatible with a wide range of GE side-by-side refrigerator models
- Straightforward 6-month or 200-gallon replacement schedule
Reasons to avoid
- Not compatible with GE models PVD28BYNIFS and PXD22BYPDFS
- Only one filter included per pack
GE XWFE genuine
Genuine (OEM) part for the XWFE refrigerator water filter. GE and Waterdrop Amazon listings. XWFE has a built-in chip; the older XWF is a different filter.
CrystalaFilters CF9 XWF Refrigerator Filter
The listing states NSF/ANSI 42 (not yet checked by us). The coconut carbon block design targets odor removal and installs tool-free with a leak-proof fit. A practical pick for owners who want a six-month supply without paying OEM prices, provided their fridge takes XWF rather than XWFE.
Reasons to buy
- The listing states NSF/ANSI 42 (not yet checked by us).
- Direct compatibility with a wide range of GE XWF French-door and side-by-side refrigerators, including post-2018 models with the smaller cartridge
- Tool-free, leak-proof installation designed for a no-mess swap
- Three-pack covers roughly 18 months of typical use at the recommended six-month or 200-gallon interval
- High-grade coconut carbon block construction aimed at odor removal
Reasons to avoid
- Not compatible with GE XWFE models, so buyers must confirm their filter code before ordering
- Replacement interval is fixed at six months or 200 gallons, with no indicator beyond that guidance
GE RPWFE Refrigerator Water Filter, 1-Pack
A genuine GE replacement filter for select French door refrigerators, certified to NSF/ANSI standards to reduce lead, chlorine, PFOA/PFOS, microplastics, and certain pharmaceuticals. It installs without tools or shutting off the water, and GE recommends a fresh filter every six months. A sensible pick for owners of compatible GE, GE Profile, Cafe, and Monogram fridges who want the fit and certification of the original part.
Reasons to buy
- Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, chlorine, PFOA/PFOS, microplastics, and select pharmaceuticals
- Guaranteed fit for select GE Appliances French door refrigerators, including GE, GE Profile, Cafe, and Monogram brands
- Tool-free installation with no need to shut off the water supply
- Six-month filter life with an optional Subscribe and Save program for automatic replacements
- Backed by a limited one-year manufacturer warranty
Reasons to avoid
- Compatibility is limited to select GE French door refrigerator models, so owners of other brands or models will need a different filter
- Genuine OEM filters typically cost more than third-party alternatives
How to Choose a Filter for Your GE Refrigerator
Start with the part number your model calls for
The listings in this guide name several different GE filter part numbers: MWF, XWFE, XWF, and RPWFE. These are not interchangeable, and the listing for each product states which part number it replaces. Check your refrigerator manual or the label inside the filter housing to see which one your model uses before you order.
Genuine GE options and what their listings state
The GE MWF genuine listing says it is an OEM part for the MWF filter, also sold as MWFP, MWFA, GWF, and SmartWater. That listing states NSF 42 and 53 certifications and a replacement interval of 6 months or 300 gallons. The manufacturer's specification page lists NSF/ANSI certifications and a replacement interval for the genuine filter.
The GE RPWFE genuine listing says it is an OEM part for the RPWFE filter, also sold as RPWFE2PK. That listing gives a replacement interval of 6 months or 170 to 200 gallons depending on the model, and it says a filter without the ID chip will not work. For certifications on that part, the listing points readers to the manufacturer listing.
Compatible replacements and the models their listings name
The MARRIOTTO XWFE (Built-in CHIP) listing says it is a replacement for XWFE with a chip, and it names GE XWFE and XWF among the filters it fits. It also lists refrigerator model prefixes such as GBE21, GDE21, GFE26, and GNE27, and it states NSF/ANSI 42 testing with a 6 month or 200 gallon interval. The listing notes it is not compatible with models PVD28BYNIFS and PXD22BYPDFS.
The Crystala Filters XWF Refrigerator Water Filter listing says it is for XWF only and is not compatible with GE XWFE. It names GE XWF, WR17X30702, and several model prefixes including GBE21, GDE21, GFE24, and GNE25, and it states NSF 42 information with a 6 month or 200 gallon interval. That listing also says it works with the newer 33 percent smaller XWF filter sold after September 2018.
Pack size and replacement interval
Most listings here describe a single filter, while the Crystala Filters listing is a 3 pack. The stated replacement intervals range from 6 months or 170 gallons to 6 months or 300 gallons, depending on the part. Use the interval printed on your own filter listing or in your manual as your reminder schedule.
When the data is silent
Some listings do not state certifications or a full compatibility list. Where that information is missing, check the listing page and your refrigerator manual before you buy. Do not assume a filter fits because it looks similar to the old one.
Check Before You Buy
The refrigerator model number can be found on a label inside the fresh food compartment or on the frame behind the door. Then match that model to the filter part number named in the listing, not just to the brand. Our guide to finding your refrigerator model number shows where the label is usually placed. You can also use the filter finder to narrow the options by model.
How We Choose What to List
We read manufacturer support pages and product listings, then summarize the part numbers, stated certifications, and replacement intervals they name. We do not run lab tests on filters, so treat every specification here as a listing statement to verify on the product page.
- 1Part on your old filterGE XWFEPrinted on the cartridge label
- 2Also sold asXWFE with built-in chipSame filter, other part numbers or pack sizes
- 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
- 4Before you orderMatch the part numberOn the box or listing: XWFE
For the full list of refrigerator models each filter fits, see the GE MWF filter page and the GE XWFE filter page.
Evaluating Genuine GE vs Compatible Filters
Reasons to buy genuine GE OEM filters
Genuine GE water filters (such as MWF, XWFE, and RPWFE) are certified against NSF/ANSI standards 42, 53, and 401 for verified contaminant reduction. For refrigerators requiring XWFE or RPWFE, OEM filters contain factory-programmed RFID microchips that communicate directly with the appliance control board, preventing automatic dispenser lockout and false error lights.
Reasons to avoid uncertified knockoffs
Low-cost knockoffs frequently lack independent NSF certification data, leaving filtration performance unverified. Additionally, third-party cartridges attempting to replicate RFID chips may fail authentication after firmware updates or suffer from imperfect O-ring seals that cause slow housing leaks behind the crisper drawer.
Related Refrigerator Maintenance Guides
Read our technical deep-dive on the GE XWFE RFID chip explained to understand how sensor communication works, or review our guide on how to flush a new refrigerator water filter to purge carbon fines before drinking.
FAQ
Why does the filter light stay on after I replace the filter?
After installing a replacement filter, the filter indicator may need to be cleared, and the manufacturer's support pages are the place to confirm the steps for a specific refrigerator. If it stays on, check that the new cartridge is the correct part number and is seated fully, then repeat the reset steps in your manual.
Do all GE refrigerators reset the filter light the same way?
No. The button name and hold time vary by model, so the sequence in your own manual is the one to follow. The listings here do not describe reset procedures.
Can I use an XWF filter in a refrigerator that takes XWFE?
The Crystala Filters listing says its XWF filter is not compatible with GE XWFE. The GE XWFE listing describes XWFE as a different filter with a built-in chip, so match the part number your model calls for.
How often should the filter be replaced?
The listings here state intervals of 6 months, with gallon limits ranging from 170 to 300 depending on the part. Follow the interval stated for your specific filter and model.
What if my model is not named in the listing?
Check the listing page and your refrigerator manual before ordering. If the model is still not listed, contact the seller or the manufacturer to confirm the correct part number.
This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.
More on this topic: Refrigerator Water Filter Problems: Slow Water, Bad Taste, Fit and Light Issues
Related guides
Browse all refrigerator water filter guides