MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

GE RPWFE Water Filter: Genuine Part and When to Replace It

Which water filter fits the GE RPWFE: genuine RPWFE and when to replace it.

The GE RPWFE is a refrigerator water filter. Below is the genuine filter, plus how often to replace it.

As an Amazon Associate I earn from qualifying purchases. Links marked #ad are affiliate links.
Quick answer: The GE RPWFE is a genuine GE refrigerator water filter (also sold as RPWFE2PK (2 pack)). Replace it every 6 months or 170 to 200 gallons, depending on the model.
OEMGE RPWFE genuine

Manufacturer part number. Confirm it matches your model before ordering.

Check price on Amazon (#ad)
Check before you buy: GE says refrigerators that use the RPWFE read the filter by radio frequency identification (RFID), that a genuine RPWFE has a visible ID chip under the label, and that a filter without the chip will not work in the refrigerator. A compatible filter that claims a chip is still the seller's claim, so check the return terms. Source: GE Appliances support.

Certifications: See the manufacturer listing for certifications. Compatibility source: GE Appliances support pages and the GE Amazon listing. No compatible filter listed: GE says a filter without the ID chip will not work.
Last checked October 29, 2026: The genuine filter's ASIN was matched to the stated part number in two independent search sources. We have not listed a compatible filter yet. Fit comes from the manufacturer and reseller listings, not from our own testing, so confirm it against your fridge. Always check the model number printed inside your refrigerator before ordering. See our methodology.

GE RPWFE at a glance

ItemWhat the sources stateSource
Part numberRPWFE (also sold as RPWFE2PK, a 2 pack)GE Amazon listing and GE support pages, in our filter map (checked 29 Oct 2026)
Replace every6 months or 170 to 200 gallons, depending on the modelGE support pages and the GE listing (checked 29 Oct 2026)
Where it sitsTop left corner of the fresh-food section, or inside the left refrigerator doorGE Appliances support, read on 17 Nov 2026
ID chipA genuine RPWFE has a visible ID chip under the label; without the chip it is not genuine and will not work in the refrigeratorGE Appliances support, read on 17 Nov 2026

When to replace the RPWFE filter

Plan on every 6 months or 170 to 200 gallons, depending on the model, or sooner if you notice any of these signs:

  • Water tastes or smells off
  • Water looks cloudy
  • Dispenser flow slows down
  • The filter indicator light comes on
Older Kenmore side-by-side refrigerator with the fresh-food door open
Example photo, not the GE RPWFE filter. The model label inside the fridge is what confirms the RPWFE fits. Photo: 2022-05-04 13 01 09 Interior of an old Kenmore refrigerator-freezer in the Franklin Farm section of Oak Hill, Fairfax County, Virginia by Famartin, CC BY-SA 4.0, via Wikimedia Commons (resized)

How to replace the filter

These steps follow GE’s own support pages for the RPWFE. Your manual is the final word for your exact model.

  1. Find the filter. GE says it is in the top left corner of the fresh-food section or inside the left refrigerator door.
  2. Open the filter door, pull on the bottom of the old cartridge and swing it outward. On the blue holder, turn it a quarter turn counterclockwise and pull it out. On the grey holder, gently pull it out once it stops swinging.
  3. Line up the new cartridge with the word FRONT as GE describes for your holder, push it in until it is fully seated (blue holder: then a quarter turn clockwise until FRONT faces out) and swing it back in. The red indicators should not be visible.
  4. Check the chip: GE says a genuine RPWFE has a visible ID chip under the label where it says “This side must face inward”, and a filter without the chip will not work.
  5. Run water through the dispenser to clear air before you drink it.

Sources: GE Appliances: replacing the water filter and GE Appliances: Replace Water Filter or Dispenser Off message.

OEM vs compatible

We list only the genuine RPWFE for now. We have not yet matched a compatible filter in two independent sources, and we would rather leave it out than guess. If you buy a third-party filter, check that the listing names RPWFE and your model, and compare its certification with the genuine one.

  1. 1Part on your old filterGE RPWFEPrinted on the cartridge label
  2. 2Also sold asRPWFE2PK (2 pack)Same filter, other part numbers or pack sizes
  3. 3ReplaceEvery 6 months or 170 to 200 gallons, depending on the modelSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: RPWFE
How the GE RPWFE matches the RPWFE filter. Diagram: MatchMyFilter, from our filter map (source: GE Appliances support pages and the GE Amazon listing. No compatible filter listed: GE says a filter without the ID chip will not work).

Lower-cost compatible options

Compatible RPWFE filters are sold by Waterdrop (WD-F19C, single and 2 pack) and Maxblue (MB-F19C, 2 pack). Their listings name the RPWFE part number together with cross references such as RPWF, WSG-4 and RWF3600A, and the Waterdrop listings also name refrigerator models such as GFE28GBLTS and PFE28KMKES. The Maxblue listing states NSF 42 and NSF 372, and the Waterdrop listings state NSF/ANSI 42 and 372. GE’s product page lists NSF 42 and 53 for the genuine RPWFE, so none of these compatible listings states the health-related standard 53. The Maxblue listing says its filter has a built-in chip; check that the listing you choose says the filter works in your model before you order, and compare the cost per filter across pack sizes on the listing.

FAQ

How often should I replace the GE RPWFE filter?

Plan on every 6 months or 170 to 200 gallons, depending on the model, or sooner if the water tastes off, looks cloudy, the dispenser slows down or the filter light comes on.

Will a filter without the RFID chip work in an RPWFE refrigerator?

GE says refrigerators that use the RPWFE read the filter by radio frequency identification (RFID) and that a filter without the ID chip will not work. A compatible filter that claims a chip is still the seller’s claim, so check the return terms.

Where is the RPWFE filter in my refrigerator?

GE says it is in the top left corner of the fresh-food section or inside the left refrigerator door. Your manual is the final word for your exact model.

All filters in this group:

Read the full guide · Search by model number

More on this topic: Replacing a Refrigerator Water Filter: Steps, Timing and Aftercare

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.