Save Money on Refrigerator Water Filters Without Wrong Parts
Saving money on a fridge filter starts with matching the part number to your model, not with the lowest price. Here is how to check compatibility before you buy.
Part of our guide: Cost and value
You save money on a refrigerator water filter by buying a filter that actually fits your model, because a wrong part is money wasted. The safe approach is to confirm your refrigerator model number and the filter part number before you order anything.
- 1Part on your old filterSamsung HAF-QINPrinted on the cartridge label
- 2Same part asHAF-QIN/EXPAlso sold as DA97-17376B; DA97-08006C
- 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
- 4Before you orderMatch the part numberOn the box or listing: HAF-QIN/EXP
Start with the model plate inside the fridge, then match that model to the part number the listing names. The products below show how listings differ in the part numbers, models and certifications they state, so you can compare them on facts rather than guesswork.
Filters we compared
EveryDrop EDR2RXD1 Refrigerator Water Filter
The EveryDrop EDR2RXD1 is the genuine replacement filter for Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators, certified to NSF 42, 53, and 401 for reducing 70 contaminants including 99 percent of microplastics. Its triple filtration system uses a coconut shell carbon core, and the twist-in design makes replacement straightforward every six months or 200 gallons. A strong pick for owners of those brands who want certified performance and a precise fit rather than a generic substitute.
Reasons to buy
- Independently certified to three NSF standards (42, 53, and 401), while many generic filters meet only one
- Reduces 99 percent of microplastics, including particles 60 times smaller than a grain of sand
- Genuine OEM part designed for a seamless twist-in fit in Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators
- Triple filtration with a renewable coconut shell based activated carbon core targets large particles, micro-filtration, and microscopic absorption
- Simple six month or 200 gallon replacement schedule with color and number matching for easy reordering
Reasons to avoid
- Non-genuine filters may damage the refrigerator, so buyers are locked into the OEM replacement
- Replacement is recommended every six months, which means recurring cost and maintenance
Waterdrop WD-INL Inline Refrigerator Water Filter
The Waterdrop WD-INL is an inline carbon block filter for refrigerators, ice makers, and other 1/4-inch water lines. It carries NSF 42 and NSF 372 certifications, reduces chlorine by 97.6%, and uses a 0.5-micron coconut shell carbon block with a one-year lifespan. A practical pick if you want better-tasting water and ice without a full under-sink system.
Reasons to buy
- NSF 42 certified for 97.6% chlorine reduction and NSF 372 for lead-free materials
- Easy 5-minute install with included 1/4-inch compression and push-to-connect fittings
- Works with many refrigerators, ice makers, coffee makers, RVs, and RO systems
- 0.5-micron coconut shell carbon block reduces fluoride, rust, and colloids
- One-year lifespan and broad compatibility with popular filter models
Reasons to avoid
- Does not reduce total dissolved solids (TDS)
- Installation requires inserting the PE tube 20mm into the cartridge to prevent leaks
AQUACREST AQF-INL Inline Water Filter
The AQUACREST AQF-INL is a universal inline filter for refrigerator and ice maker lines, rated for 5 years or 5,000 gallons. It uses a 0.5 micron coconut shell carbon block to reduce chlorine, taste, odor, fluoride, rust, and sediment, and comes with both compression and push-to-connect fittings for a no-cut install. A solid pick for households wanting long-lasting, low-maintenance filtration across multiple appliances.
Reasons to buy
- Long 5-year or 5,000-gallon service life keeps replacement frequency low
- 0.5 micron coconut shell activated carbon block reduces chlorine, taste, odor, fluoride, rust, and sediment
- Works with refrigerators, ice makers, coffee makers, RVs, boats, and RO systems, plus compatibility with major fridge brands
- Includes 1/4 inch compression and push-to-connect fittings, PE tubing, hex nut, sleeve, and insert for a complete install
- BPA-free and lead-free materials with components reviewed against NSF/ANSI standards
Reasons to avoid
- Does not reduce total dissolved solids (TDS)
- Requires inserting the PE tube 20mm into the cartridge to prevent leaks, which adds a step to installation
HMASAV W001 2-Pack Refrigerator Water Filter
The HMASAV W001 is a two-pack replacement filter for Everydrop Filter 1 and a long list of Whirlpool and Kenmore refrigerator models. The listing states NSF/ANSI 42 (not yet checked by us). A solid budget-friendly pick if you want a spare filter on hand and a 60-day refund or replacement guarantee.
Reasons to buy
- The listing states NSF/ANSI 42 (not yet checked by us).
- Tool-free installation with built-in plugs designed to reduce leak risk
- Two-pack bundle covers a full year of filtering at the recommended 6-month interval
- Broad compatibility across Everydrop Filter 1, Whirlpool, Kenmore, and KitchenAid part numbers
- 60-day refund or replacement policy with no need to return the filter
Reasons to avoid
- Requires flushing about 4 gallons of water before first use to maximize efficiency
- Replacement interval is capped at 6 months or 200 gallons, so heavy households will go through both filters quickly
EcoPure EPINL30 5-Year In-Line Water Filter
A long-life inline filter for fridges, ice makers, RVs, and under-sink setups, rated to last up to five years. The listing states NSF/ANSI 42 (not yet checked by us). A practical pick for households that want fewer filter swaps and a straightforward DIY install.
Reasons to buy
- Up to five years of filtration per filter, reducing replacement frequency and long-term cost
- Universal inline design fits refrigerators from major brands plus ice makers, coffee machines, water coolers, RVs, boats, and RO systems
- Includes both 1/4-inch compression and push-to-connect fittings for tool-free installation on copper or plastic lines
- The listing states NSF/ANSI 42 (not yet checked by us).
- Designed, engineered, and assembled in the USA
Reasons to avoid
- Plastic construction may be less durable than metal-bodied inline filters in exposed installations
- 90-day manufacturer warranty is shorter than the advertised five-year filter lifespan
GE MWF Refrigerator Water Filter
The GE MWF is a genuine replacement filter for select GE French door, side-by-side, and built-in refrigerators, including GE Profile, Café, and Monogram models. GE product page lists NSF/ANSI 42 and 53; the listing says it reduces over 70 impurities such as lead, chlorine, PFOA/PFOS, microplastics, and five trace pharmaceuticals. Installation is tool-free and does not require shutting off the water, and the filter should be replaced every six months. It suits owners of compatible GE refrigerators who want a certified, guaranteed-fit filter.
Reasons to buy
- Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, PFOA/PFOS, microplastics, and select pharmaceuticals
- Guaranteed fit for select GE, GE Profile, Café, and Monogram refrigerators
- Tool-free installation with no water shutoff required
- Six-month filter life with Subscribe & Save option for automatic replacement
Reasons to avoid
- Compatible only with select GE refrigerator models, not universal
- Requires replacement every six months to maintain filtration performance
MARRIOTTO EDR1RXD1 Filter 1, 2-Pack
A budget-friendly two-pack replacement for Whirlpool Filter 1 and a long list of compatible part numbers. The coconut shell carbon block is rated for six months or 200 gallons per filter, and the bundle covers a full year of filtration for households that go through cartridges quickly. Best suited to owners of the listed Whirlpool and Maytag refrigerator models who want a straightforward, low-cost swap.
Reasons to buy
- Two filters per pack cover about a year of typical use at six months each
- Broad compatibility list covers Filter 1, EDR1RXD1, W10295370A, P4RFWB, 46-9930 and many more part numbers
- Coconut shell carbon block construction targets impurities and taste
- The listing states a certification (not yet checked by us).
- Manufacturer guarantees correct fit to avoid water damage
Reasons to avoid
- Plastic housing is the only listed body material, which may feel less substantial than OEM cartridges
- Warranty description is not specified, so long-term coverage terms are unclear
GE XWFE genuine
Genuine (OEM) part for the XWFE refrigerator water filter. GE and Waterdrop Amazon listings. XWFE has a built-in chip; the older XWF is a different filter.
GE RPWFE Refrigerator Water Filter, 1-Pack
A genuine GE replacement filter for select French door refrigerators, certified to NSF/ANSI standards to reduce lead, chlorine, PFOA/PFOS, microplastics, and certain pharmaceuticals. It installs without tools or shutting off the water, and GE recommends a fresh filter every six months. A sensible pick for owners of compatible GE, GE Profile, Cafe, and Monogram fridges who want the fit and certification of the original part.
Reasons to buy
- Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, chlorine, PFOA/PFOS, microplastics, and select pharmaceuticals
- Guaranteed fit for select GE Appliances French door refrigerators, including GE, GE Profile, Cafe, and Monogram brands
- Tool-free installation with no need to shut off the water supply
- Six-month filter life with an optional Subscribe and Save program for automatic replacements
- Backed by a limited one-year manufacturer warranty
Reasons to avoid
- Compatibility is limited to select GE French door refrigerator models, so owners of other brands or models will need a different filter
- Genuine OEM filters typically cost more than third-party alternatives
everydrop by Whirlpool Filter 1 (EDR1RXD1)
Genuine (OEM) part for the EDR1RXD1 (Filter 1) refrigerator water filter. everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1.
How to choose how to save money on refrigerator water filters without buying the wrong part
Match the part numbers the listing names
The everydrop by Whirlpool Filter 2 (EDR2RXD1) listing names the EDR2RXD1 filter and also W10413645A. The GE MWF genuine listing names MWF, MWFP, MWFA, GWF and SmartWater, while the GE XWFE genuine listing notes that XWFE has a built-in chip and the older XWF is a different filter.
The GE RPWFE genuine listing states that GE says a filter without the ID chip will not work. For the EDR1RXD1 replacements, the HMASAV and MARRIOTTO listings name W10295370A, Filter 1, WHR1RXD1 and several refrigerator model codes, so read those lists against your own model plate.
Check what the listing says about certifications
The everydrop Filter 2 listing states NSF/ANSI 42, 53 and 401, and the GE MWF product page lists NSF/ANSI 42 and 53. The GE XWFE product page lists NSF/ANSI 42, 53 and 401, while the GE RPWFE listing says to see the manufacturer listing for certifications.
The HMASAV EDR1RXD1 replacement states NSF 42 (claim made by the seller, not verified by us). The Waterdrop INL inline filter states NSF 42 and NSF 372, and the EcoPure EPINL30 states NSF/ANSI Standard 42. Where a listing is silent, check the refrigerator manual and the listing itself.
Compare the stated replacement interval
Manufacturers usually list a replacement interval for their refrigerator water filters. The GE XWFE listing states 6 months, and the GE RPWFE listing states 6 months or 170 to 200 gallons depending on the model.
Some replacement filter listings state a replacement interval in months or gallons. Listed inline filter lifespans vary by product, and some manufacturers note that actual life may vary with water conditions.
Note the pack size and what the listing says it fits
Some replacement filters are offered in multi packs. The GE RPWFE listing notes it is also sold as RPWFE2PK, a 2 pack, so check the pack size before you compare what you are getting.
The inline filters, EcoPure EPINL30, Waterdrop INL and AQUA CREST INL, are described for refrigerators, ice makers and other appliances with 1/4 inch fittings. Manufacturers describe some inline filters as fitting many refrigerator brands, but an inline filter is a different setup from a cartridge that drops into the fridge, so check which type your refrigerator uses.
Watch for chip and model specific notes
The GE XWFE and GE RPWFE listings both mention a chip, and the RPWFE listing says a filter without the ID chip will not work. That note matters because a cheaper part number may not be the right one for a fridge that expects a chip.
For the EDR1RXD1 replacements, the listings name long lists of refrigerator model codes. Read those codes against your model plate rather than assuming that a similar part number fits.
Check before you buy
Check the refrigerator's model information and note the full model number before shopping for a filter. Then match that model to the part number the listing names, not just to the brand name.
Our guide to finding your refrigerator model number walks through where to look for Samsung, LG, Whirlpool, GE and Frigidaire. You can also use the filter finder to narrow the part number before you order.
FAQ
Will a cheaper compatible filter always fit my refrigerator?
Fit depends on the part number and model that the listing names, so check compatibility rather than assuming any filter will work. Check the listing’s compatibility list against your model plate, and check the manual if the listing is unclear.
What if my GE refrigerator uses a filter with a chip?
The GE XWFE listing notes a built-in chip, and the GE RPWFE listing says GE states a filter without the ID chip will not work. In that case, match the exact part number the manual names rather than a similar one.
How often do the listings say to replace the filter?
Some replacement filters list a replacement interval, and some also mention a gallon limit. Manufacturers describe some inline filters as having a longer service life than standard refrigerator filters.
Does an inline filter replace the cartridge in my fridge?
The inline listings describe installation on a 1/4 inch water line with compression or push-to-connect fittings. That is a different setup from a drop-in cartridge, so check your refrigerator manual to see which type it uses.
Where do I find the model number to match the part?
Look for the model plate inside the refrigerator and copy the full model number. Then compare it with the model and part numbers in the listing, or use our model number guide.
This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.
Reasons to Buy and Reasons to Avoid
When selecting a replacement cartridge, base your decision on verifiable specifications rather than marketing claims:
- Reasons to buy: Genuine or verified compatible filters provide documented reduction of chlorine taste and odor, utilize precision-molded locking tabs that prevent leaks into the refrigerator cabinet, and offer multi-pack bundles that reduce annual replacement expenses.
- Reasons to avoid: Uncertified cartridges with missing certification marks often fail to seat cleanly, risk cracking internal manifold connections, and do not provide verified lead or cyst filtration.
More on this topic: Refrigerator Water Filter Cost and Value: What to Check Before You Buy
Related guides
Browse all refrigerator water filter guides
