MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

LG LT700P vs LT800P: Which Filter Fits Your Fridge

The LT700P and LT800P are different filters for different LG refrigerators. Check your model number and the part number on your current filter before ordering.

The LG LT700P and LT800P are not interchangeable filters. They are built for different refrigerator models, so the right choice depends on the model number of your fridge and the part number printed on the filter you are replacing. The listings below show one genuine LG LT700P pack and two compatible replacements, one for LT700P and one for LT800P.

  1. 1Part on your old filterKenmore 46-9690Printed on the cartridge label
  2. 2Same part asLT700PAlso sold as LT700P; ADQ36006101; 9690
  3. 3ReplaceEvery 6 months or 200 gallonsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: LT700P
How the Kenmore 46-9690 matches the LT700P filter. Diagram: MatchMyFilter, from our filter map (source: LG and Refresh Amazon listings, EcoAqua cross-reference).

Before you order, find your refrigerator model number and compare it with the compatibility information in each listing. Also check the part number on your current filter, such as ADQ36006101 for LT700P or ADQ73613401 for LT800P, because that is the most direct match.

Filters we compared for LT700P

1
Filterlogic FL-RF20 3-Pack Water Filter

Filterlogic FL-RF20 3-Pack Water Filter

Filterlogic

A budget-friendly three-pack replacement for LG LT800P and ADQ73613401 refrigerator filters. The listing states NSF/ANSI 42 and 372 (not yet checked by us). A practical pick for LG owners who want to stock up without paying OEM prices.

Reasons to buy

  • The listing states NSF/ANSI 42 and 372 (not yet checked by us).
  • Reduces 99% of chlorine plus sand, sediment, and rust, per third-party lab evaluation cited by the brand
  • Pressure-reviewed and validated for 100,000 cycles for leak prevention
  • Three filters per pack with up to six months of service life each
  • Wide compatibility across many LG refrigerator models and Kenmore 469490

Reasons to avoid

  • Only rated for 200 gallons per filter, which may mean more frequent changes for heavy households
  • Compatibility is limited to specific LG and Kenmore models, so owners of other brands should verify fit first
2
Pureline 9690 LT700P Refrigerator Water Filter

Pureline 9690 LT700P Refrigerator Water Filter

PURELINE

The Pureline 9690 is a direct replacement for LG LT700P and Kenmore 9690 filters, built around a coconut shell carbon block with a larger surface area than typical budget filters. It carries NSF 42 and 372 certifications plus WQA and IAPMO verification, and is rated for 300 gallons or about six months of use. A solid pick for LG and Kenmore owners who want a certified, leak-free fit without paying OEM prices.

Reasons to buy

  • Coconut shell carbon block with twice the surface area and more micropores than standard carbon blocks
  • NSF 42 and NSF 372 certified, plus WQA and IAPMO verification
  • Lead-free, BPA-free, and food-grade materials
  • Designed to match original filter dimensions for a precise, leak-free fit
  • Rated for 300 gallons or roughly six months of use

Reasons to avoid

  • Only compatible with specific LG and Kenmore refrigerator models, so owners of other brands need to check the list
  • Sold as a single pack, which may not suit households that prefer buying filters in bulk
3
LG LT700P 3-Pack Refrigerator Water Filter

LG LT700P 3-Pack Refrigerator Water Filter

The listing states NSF/ANSI 42 and 53 (not yet checked by us). It removes 99.99% of cysts, 99% of asbestos, and nearly all mercury, lead, and benzene. This is the seller's claim, not verified by us. The listing states a certification (not yet checked by us).

Reasons to buy

  • Genuine LG OEM part (ADQ36006101) ensures fit and performance for compatible LG refrigerators
  • The listing states NSF/ANSI 42 and 53 (not yet checked by us).
  • Each filter lasts up to 200 gallons or six months, and the 3-pack covers roughly 18 months
  • Includes filter, instructions, and a one-year manufacturer warranty

Reasons to avoid

  • Only compatible with specific LG refrigerator models that use the LT700P cartridge
  • Carbon and plastic construction means filters require regular replacement to maintain performance

How to choose between LG LT700P vs LT800P

Match the part number the listing names

The LG LT700P LT700P3 listing names the genuine LG part ADQ36006101 and also lists ADQ36006113, ADQ75795103, and AGF80300702. The Pureline 9690 listing says it replaces LT700P, LT700PC, ADQ36006101, ADQ36006101S, ADQ36006102, ADQ36006102S, 9690, 46-9690, and several other codes. The Filterlogic ADQ73613401 listing says it is an ideal replacement for LT800P, LT800P/PC/PCS, ADQ736134, and ADQ73613402. If your current filter shows one of these codes, start there.

Check the refrigerator models each listing says it fits

The Filterlogic listing names LG models such as LSXS26326S, LSXS26366S, LMXC23746D, LMXC23746S, LMXS30746S, LMXS30756S, and LMXS30776D. The Pureline listing includes a long list of LG refrigerator models, including LFCS31626S, LFX25978SB, LFX28968D, LFX31925SB, and LMXS27626S, among others. The LG LT700P3 listing does not name refrigerator models, so check your manual or the listing itself. Where a listing is silent on your model, confirm with the refrigerator manual before buying.

Compare what the listings say about certifications

The LG LT700P3 description says the filters are NSF certified and mentions NSF42 and NSF53. The Filterlogic listing states NSF/ANSI 42 and 372 certification. The Pureline listing says it has NSF 372, NSF 42, WQA, and IAPMO certification. Certification claims are statements from the seller or manufacturer, so read the listing details and check the certification mark on the product you receive.

Look at pack size and stated replacement interval

The LG LT700P3 is a 3 count pack, and its description states a 6 month or 200 gallon capacity. The Filterlogic listing is also a 3 pack and states an extended 6 month service life. The Pureline listing says the filter handles up to 300 gallons and is recommended to change every 6 months for the average household. These are listing statements, so follow the interval in your refrigerator manual if it differs.

Decide between genuine and compatible

The LG LT700P3 listing describes a genuine LG part, while the Pureline and Filterlogic listings describe compatible replacements for LG part numbers. The Pureline listing says its filters are made to the exact design and specifications as the original brand filter, and the Filterlogic listing describes a simplified installation design. If you want the part number that matches your original filter exactly, compare the codes on each listing with the code on your old filter.

Check before you buy

Find the refrigerator model number on a label inside the fresh food compartment or on the back of the unit, and write it down exactly. Then compare that model number with the compatibility list in the product listing. Also note the part number on your current filter, because it points to the correct replacement family. For help locating the label, see How to Find Your Refrigerator Model Number, and you can cross check your model with the filter finder.

Frequently asked questions

Is the LG LT700P the same as the LT800P?

No. The listings show different part numbers: the LT700P family includes ADQ36006101, while the LT800P family includes ADQ73613401. They are listed for different refrigerator models, so check your model number and current filter code.

Will the Filterlogic ADQ73613401 fit my LT700P refrigerator?

The Filterlogic listing says it is a replacement for LT800P and related part numbers, not LT700P. Check your refrigerator model against the Filterlogic compatibility list, and check your manual before ordering.

Does the Pureline 9690 replace the LG LT700P?

The Pureline listing says it replaces LG LT700P, LT700PC, ADQ36006101, and several other codes. Confirm that your refrigerator model appears in the listing’s compatibility list before you buy.

How often should I change the filter?

The LG LT700P3 and Filterlogic listings state a 6 month interval, and the Pureline listing recommends every 6 months for the average household. Your refrigerator manual may give a different interval, so follow that guidance.

What if my model number is not in the listing?

If your model is not listed, do not assume the filter fits. Check the part number on your current filter and the refrigerator manual, and look for a listing that names your model or part number.

How to Read Fit and Certification Claims on Filter Listings

Compatibility statements on a filter listing are only as useful as the model list behind them. The Filterlogic listing names specific LG refrigerators, such as LSXS26326S and LMXC23746D, while the Pureline listing prints a long set of LG model codes. The LG LT700P3 listing does not name refrigerator models at all, so its fit depends on the part codes it names. When a listing is silent on your model, treat that as a gap to close with your manual rather than a yes.

Certification wording also deserves a careful read. The Filterlogic listing states NSF/ANSI 42 and 372 certification and describes lead-free materials. The Pureline listing says its filters carry NSF 372, NSF 42, WQA, and IAPMO certification and are made with lead-free, BPA-free, food grade materials. The LG LT700P3 description mentions NSF42 and NSF53. These are seller statements, so check the mark on the product you receive.

What the Certification Numbers Mean for a Buyer

The listings use the certification numbers as shorthand for what the filter is claimed to do. The Filterlogic listing ties its NSF/ANSI 42 and 372 certification to reducing chlorine and unwanted contaminants and to lead-free materials. The Pureline listing ties its certifications to lead-free, BPA-free, food grade construction. Read those claims as descriptions of the product, not as a promise about your specific water.

Why the Model List Matters More Than the Badge

A certification badge does not tell you whether a filter fits your refrigerator. Fit comes from the model and part codes in the listing. Compare your refrigerator model number and the code on your old filter with the codes each listing names, and confirm anything unclear in your manual before ordering.

Common Mistakes When Choosing Between These Two Filters

The most common error is assuming a filter that fits one LG refrigerator will fit another. The LT700P family and the LT800P family appear in separate listings with separate part codes, and the Filterlogic listing is written for LT800P and related codes, not LT700P. Buying by brand name alone, without checking the code, is how the wrong filter ends up at the door.

A second mistake is ordering a multi pack before confirming a single filter fits. The LG LT700P3 and Filterlogic listings are both three count packs, and the Pureline listing describes a single filter with a stated capacity. If the fit is wrong, a pack multiplies the problem. Confirm one correct match first, then decide on quantity.

Skipping the Old Filter Code

The code printed on the filter you are removing is the most direct clue. The listings name codes such as ADQ36006101 for the LT700P family and ADQ73613401 for the LT800P family. Write down what your current filter shows and compare it with the listing before you buy.

Ignoring the Stated Replacement Interval

The listings give different service statements. The LG LT700P3 description states a 6 month or 200 gallon capacity, the Filterlogic listing states an extended 6 month service life, and the Pureline listing says up to 300 gallons with a recommendation to change every 6 months for the average household. Follow your refrigerator manual if it gives a different interval.

When to Replace Your Filter and What to Have Ready

The listings point to a six month rhythm as a general guide, with the Pureline listing adding a gallon capacity and the LG LT700P3 listing stating a gallon capacity as well. Treat those as listing statements and let your manual set the schedule if it differs. A filter that has been in service longer than the stated interval is the one to replace first.

Before installing, have the new filter and the guidance that came with it on hand. The Pureline listing says installation takes no longer than two minutes when you follow the guidance in the box, and the Filterlogic listing describes a simplified installation design with clear guidance included. Keep the old filter until the new one is seated and the water runs clear.

What to Check After Installation

The Pureline listing says its filters are manufactured to the exact design and specifications as the original brand filter to prevent leakage, and the Filterlogic listing says its filters are pressure tested and validated for many cycles for leak prevention. After fitting, check for drips and confirm the filter is fully seated before closing the compartment.

Keeping a Record for Next Time

Note the refrigerator model number and the part code on the filter you installed. That record makes the next purchase simpler and helps you avoid mixing up the LT700P and LT800P families. Store it with your appliance manual so it is easy to find.

Water drop
Illustrative photo. Photo by Jimmy Chang on Unsplash

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

Next step: See the LT700P filter page for the genuine part and the models it fits.

More on this topic: OEM vs Compatible Refrigerator Water Filters: Part Comparisons by Brand

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.