MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

LG Refrigerator Water Dispensing Slowly: What to Check

Part of our guide: Troubleshooting filter problems ๐Ÿ“Œ Key takeaways LG says low water pressure or a disrupted water supply...

๐Ÿ“Œ Key takeaways

  • LG says low water pressure or a disrupted water supply is the usual cause of slow dispensing
  • A timed fill test helps you judge whether pressure is in LG's normal range
  • Removing the filter for a retest can show whether the filter is restricting flow
  • If the valve is fully open and pressure is still low, LG advises contacting a plumber

LG says slow water dispensing is usually caused by low water pressure from the main supply or a disruption in the water flow. LG recommends checking the pressure with a timed fill test, then the water filter, the home's water valve, and the water line.

Start With Water Pressure

LG says slow water dispensing is usually the result of low water pressure from the main water supply, or a disruption of the water supply flow. That makes pressure the first thing to look at, before you take anything apart.

LG says the dispenser needs a cold water supply with pressure between 138 kPa and 827 kPa to operate. LG also lists a target of 20 to 120 psi for optimal performance. If you are not sure how to measure your home's pressure, a plumber can check it.

  • LG says low water pressure or a disrupted supply is the usual cause
  • LG lists 138 kPa to 827 kPa as the required supply pressure
  • LG lists 20 to 120 psi for optimal performance
  1. 1Part on your old filterLG ADQ36006101Printed on the cartridge label
  2. 2Same part asLT700PAlso sold as ADQ36006101; ADQ36006102; Kenmore 46-9690
  3. 3ReplaceEvery 6 months or 200 gallonsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: LT700P
How the LG ADQ36006101 matches the LT700P filter. Diagram: MatchMyFilter, from our filter map (source: LG Amazon listing; EcoAqua and Filters Fast compatibility lists).

Run a Timed Fill Test

LG suggests using a stopwatch to time how long it takes to fill a cup. LG says 3 and a half to 8 seconds is the normal range for water pressure. Anything over 8 seconds may point to low water pressure.

For a more specific check, LG describes a fill test with a stopwatch and a measuring cup. Time how long it takes to fill the cup to 8 oz. Keep that number handy, because you will compare it after the next step.

  1. Get a stopwatch and a measuring cup
  2. Time how long it takes to fill the measuring cup to 8 oz
  3. Note the time so you can compare it after removing the filter

Check the Water Filter

LG recommends changing the water filter once every 3 to 6 months. The right interval depends on your city's water quality, how much water your household uses, the refrigerator water tank capacity, and the filter icon on the display. LG says the light comes on just before the current filter runs out, which gives you time to get a new one.

To confirm the filter is the problem, LG says to remove the water filter and repeat the fill test. If water flow increases, the filter needs to be replaced. LG notes that filter location varies by model. Units from 2017 and newer have a built in bypass so they can run without a filter, while older units need the filter bypass installed.

  1. Unplug the appliance
  2. Turn off the water supply to the appliance
  3. Open the left refrigerator door and remove the bottom door bin (filter location varies by model)
  4. Remove the disposable water filter
  5. Insert the new filter into the filter head and rotate it clockwise until the arrow on the filter lines up with the arrow on the filter head
  6. Swing the filter back into the compartment and reinstall the door bin
  7. Turn the water supply back on and plug the appliance in
  8. Press and hold the water filter button for 3 seconds to reset the replacement filter icon

Check the Water Valve and Line

Next, LG says to check the home's water valve connected to the refrigerator. Make sure it is fully open. If the valve is fully open and pressure is still low, LG advises contacting a plumber to adjust the water pressure.

LG also says to check the water line between the refrigerator and the home's water supply. Look for anything that could disrupt flow along that run. If dispensing still does not improve after these checks, LG says the unit will require service for a proper diagnosis, which you can request through LG's repair page.

  • Confirm the water valve connected to the refrigerator is fully open
  • If it is open and pressure is still low, LG says to contact a plumber
  • Check the water line between the refrigerator and the home's water supply
  • If nothing improves, LG says the unit needs service for a proper diagnosis

A Sensible Order to Work Through

Working in LG's order keeps you from replacing parts you do not need. Pressure and the timed fill test come first because they tell you whether the problem is at the supply. The filter comes next because it is easy to rule out with a retest. The valve and line come last, and service is the final step if none of it helps.

Keep your fill test times written down as you go. Comparing the time before and after removing the filter is how LG says you can tell whether the filter was restricting flow.

  1. Time a cup fill and compare it with LG's 3 and a half to 8 second range
  2. Remove the filter and repeat the 8 oz fill test
  3. Replace the filter if flow increased without it
  4. Confirm the home's water valve is fully open
  5. Check the water line between the refrigerator and the supply
  6. Request service if dispensing still does not improve

What to check for your model

Filter location varies by model, and LG says units older than 2017 need a filter bypass to run without a filter. These LG instructions do not cover diagnosing a failed dispenser part, so check your owner's manual for your model's layout.

Next step

A clear glass of water on a wooden table
Illustrative photo. Photo by Phฦฐแป›c Sang on Unsplash

โ” FAQ

How long should it take to fill a cup from an LG refrigerator dispenser?

LG says 3 and a half to 8 seconds is the normal range for water pressure when filling a cup. Anything over 8 seconds may indicate possible low water pressure.

How do I know if my LG water filter is causing slow dispensing?

LG says to remove the water filter and retry the 8 oz fill test. If water flow increases without the filter, the filter needs to be replaced.

What water pressure does an LG refrigerator dispenser need?

LG says the dispenser requires a cold water supply with pressure between 138 kPa and 827 kPa, and lists 20 to 120 psi for optimal performance. If the valve is fully open and pressure is still low, LG advises contacting a plumber.

Sources

This article was written by the MatchMyFilter editorial team from manufacturer support pages. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

More on this topic: Refrigerator Water Filter Problems: Slow Water, Bad Taste, Fit and Light Issues

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.