Internal vs Inline Refrigerator Water Filter Guide
Internal filters sit inside the fridge and inline filters mount on the water line. This guide explains how to match either type to your model and part number.
Part of our guide: Choosing and matching a filter
Internal vs inline refrigerator water filter comes down to where the filter sits. An internal filter is a cartridge that fits inside a housing built into the refrigerator, while an inline filter is a separate cartridge installed on the water line before the fridge. The right choice depends on what your refrigerator was built to accept.
- 1Part on your old filterLG LT800PPrinted on the cartridge label
- 2Also sold asADQ73613401; LT800PCSame filter, other part numbers or pack sizes
- 3ReplaceEvery 6 months or 200 gallonsSooner if flow slows or taste changes
- 4Before you orderMatch the part numberOn the box or listing: LT800P
Before you shop, find your refrigerator model number and the part number of the filter it uses. Then check whether that part is an internal cartridge or an inline cartridge, and confirm the fittings and replacement interval the listing states. The products below show both types so you can compare the details each listing provides.
Filters we compared for XWFE
Frigidaire ULTRAWF PureSource Ultra Refrigerator
The Frigidaire ULTRAWF is a genuine OEM replacement filter for Frigidaire refrigerators with the PureSource Ultra system. It uses a carbon block to reduce chlorine taste and odor plus contaminants like lead, nitrates, pesticides, and mercury, and it is certified to NSF/ANSI 42, 53, and 401. Installation is tool-free: push to release the old filter, push the new one until it clicks, and run water for three minutes to prime. A solid choice for owners who want a factory-certified filter and a straightforward swap.
Reasons to buy
- Genuine Frigidaire filter certified to NSF/ANSI 42, 53, and 401 for chlorine taste and odor, lead, mercury, and other contaminants
- Tool-free push-to-release and click-in installation with a simple three-minute priming step
- Carbon block construction (polyethylene and extruded carbon) for reliable filtration
- WQA certified for sustainability under WQA/ASPE/ANSI S 803
Reasons to avoid
- Designed only for Frigidaire refrigerators with the PureSource Ultra filter system, so it will not fit other brands or systems
- The six-month filter reminder light does not reset automatically and must be manually cleared per the refrigerator manual
Waterdrop WD-INL Inline Refrigerator Water Filter
The Waterdrop WD-INL is an inline carbon block filter for refrigerators, ice makers, and other 1/4-inch water lines. It carries NSF 42 and NSF 372 certifications, reduces chlorine by 97.6%, and uses a 0.5-micron coconut shell carbon block with a one-year lifespan. A practical pick if you want better-tasting water and ice without a full under-sink system.
Reasons to buy
- NSF 42 certified for 97.6% chlorine reduction and NSF 372 for lead-free materials
- Easy 5-minute install with included 1/4-inch compression and push-to-connect fittings
- Works with many refrigerators, ice makers, coffee makers, RVs, and RO systems
- 0.5-micron coconut shell carbon block reduces fluoride, rust, and colloids
- One-year lifespan and broad compatibility with popular filter models
Reasons to avoid
- Does not reduce total dissolved solids (TDS)
- Installation requires inserting the PE tube 20mm into the cartridge to prevent leaks
AQUACREST AQF-INL Inline Water Filter
The AQUACREST AQF-INL is a universal inline filter for refrigerator and ice maker lines, rated for 5 years or 5,000 gallons. It uses a 0.5 micron coconut shell carbon block to reduce chlorine, taste, odor, fluoride, rust, and sediment, and comes with both compression and push-to-connect fittings for a no-cut install. A solid pick for households wanting long-lasting, low-maintenance filtration across multiple appliances.
Reasons to buy
- Long 5-year or 5,000-gallon service life keeps replacement frequency low
- 0.5 micron coconut shell activated carbon block reduces chlorine, taste, odor, fluoride, rust, and sediment
- Works with refrigerators, ice makers, coffee makers, RVs, boats, and RO systems, plus compatibility with major fridge brands
- Includes 1/4 inch compression and push-to-connect fittings, PE tubing, hex nut, sleeve, and insert for a complete install
- BPA-free and lead-free materials with components reviewed against NSF/ANSI standards
Reasons to avoid
- Does not reduce total dissolved solids (TDS)
- Requires inserting the PE tube 20mm into the cartridge to prevent leaks, which adds a step to installation
EcoPure EPINL30 5-Year In-Line Water Filter
A long-life inline filter for fridges, ice makers, RVs, and under-sink setups, rated to last up to five years. The listing states NSF/ANSI 42 (not yet checked by us). A practical pick for households that want fewer filter swaps and a straightforward DIY install.
Reasons to buy
- Up to five years of filtration per filter, reducing replacement frequency and long-term cost
- Universal inline design fits refrigerators from major brands plus ice makers, coffee machines, water coolers, RVs, boats, and RO systems
- Includes both 1/4-inch compression and push-to-connect fittings for tool-free installation on copper or plastic lines
- The listing states NSF/ANSI 42 (not yet checked by us).
- Designed, engineered, and assembled in the USA
Reasons to avoid
- Plastic construction may be less durable than metal-bodied inline filters in exposed installations
- 90-day manufacturer warranty is shorter than the advertised five-year filter lifespan
GE XWFE genuine
Genuine (OEM) part for the XWFE refrigerator water filter. GE and Waterdrop Amazon listings. XWFE has a built-in chip; the older XWF is a different filter.
Membrane Solutions T33 Inline Carbon Filter Kit
This inline coconut shell carbon filter kit is built for refrigerators, ice makers, and other point-of-use setups, with 1/4-inch quick connectors and a 3/8-inch adapter included. The listing states NSF/ANSI 42 (not yet checked by us). It suits homeowners and RV users who want a simple external filter without plumbing work.
Reasons to buy
- Compatible with 1/4-inch and 3/8-inch pipes, plus included adapters and 118-inch PE tube for flexible installation
- The listing states NSF/ANSI 42 (not yet checked by us).
- Quick-connect fittings arrive assembled, allowing setup in seconds without tools
- Works across refrigerators, ice makers, coffee makers, coolers, RVs, and RO systems
- Long service life: up to 12 months as a post-RO filter or 6 months standalone
Reasons to avoid
- Requires flushing for 1 to 2 minutes before first use to clear carbon fines
- Flow direction must be observed during installation, which can trip up first-time users
everydrop by Whirlpool Filter 1 (EDR1RXD1)
Genuine (OEM) part for the EDR1RXD1 (Filter 1) refrigerator water filter. everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1.
How to Choose an Internal vs Inline Refrigerator Water Filter
Match the part number the listing names
The Frigidaire ULTRAWF listing names the PureSource Ultra system and describes a push to release, push to click installation inside the refrigerator. The GE XWFE listing names the XWFE part with a built in chip and notes that the older XWF is a different filter. The everydrop by Whirlpool Filter 1 listing names EDR1RXD1 and also W10295370A, and says it fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1.
The inline listings name several replacement part numbers. The Waterdrop INL listing says it can replace GE GXRTDR, Culligan IC-100A, Omnipure K2533JJ, Samsung DA29-10105J, Whirlpool WHKF-IMTO and others. The EcoPure EPINL30 and AQUA CREST INL listings describe universal compatibility with brands such as Samsung, GE, LG, Whirlpool and Frigidaire. Check the listing and your refrigerator manual to confirm your exact part number.
Certifications and replacement interval
The Frigidaire listing says the filter is tested and certified by NSF International against NSF/ANSI Standards 42, 53 and 401. The GE XWFE product page lists NSF/ANSI 42, 53 and 401 and a listed replacement interval of 6 months. The everydrop Filter 1 listing states NSF 42, 53 and 401 and a 6 month interval.
Among the inline options, the EcoPure EPINL30 listing says it is certified to NSF/ANSI Standard 42 and lasts up to five years. The Waterdrop INL listing says it is NSF 42 certified for chlorine reduction and NSF 372 certified for lead free material, with a one year lifespan. The AQUA CREST INL listing states a 5 year or 5,000 gallon service life, and the Membrane Solutions kit listing says 12 months as a post RO filter or 6 months as a standalone inline filter. Where a listing is silent, check the packaging and your manual.
Pack size and what is in the box
The Frigidaire ULTRAWF listing is for one filter. The GE XWFE and everydrop Filter 1 listings each describe a single genuine replacement part. The inline listings describe kits rather than single cartridges in some cases.
The Waterdrop INL listing says it includes 1/4 inch compression and push to connect fittings and a 7/16 inch adapter fitting. The AQUA CREST INL listing says the box includes 1/4 inch PE tubing, compression and push to connect fittings, a hex nut, a sleeve and an insert. The EcoPure EPINL30 listing says it includes both 1/4 inch compression and push to connect fittings.
What each listing says it fits
The internal filters are tied to specific refrigerator systems. The Frigidaire listing says it installs in Frigidaire refrigerators with the PureSource Ultra filter system. The GE XWFE listing names the XWFE part and notes the built in chip, and the everydrop listing names the Whirlpool family of brands that use Filter 1.
The inline filters are described more broadly. The EcoPure EPINL30 listing says it works with refrigerators, ice makers, coffee machines, water coolers, fountains, RVs, campers, boats and RO systems. The Waterdrop INL and AQUA CREST INL listings describe similar multi use applications and name several refrigerator brands. The Membrane Solutions kit listing says it is compatible with 1/4 inch and 3/8 inch pipes. Confirm the fit against your model number and manual.
Installation and fittings
Internal filters are described as cartridge swaps. The GE and everydrop listings describe genuine replacement parts for their respective housings.
Inline filters connect to the water line. The Waterdrop INL, AQUA CREST INL, EcoPure EPINL30 and Membrane Solutions listings all describe 1/4 inch fittings, and the Membrane Solutions kit also lists 3/8 inch adapters. The Waterdrop and AQUA CREST listings note that the PE tube should be inserted 20mm to prevent leaks. Check the listing and your manual for the correct flow direction and fittings.
Check Before You Buy
Write it down and compare it with the compatibility information in the listing. Use our guide to find your refrigerator model number if you are unsure where to look. Then confirm the filter part number with our filter finder before ordering.
Frequently Asked Questions
Can I use an inline filter instead of an internal filter?
An inline filter installs on the water line and is described by the listings as compatible with many refrigerator brands. Whether it replaces your internal filter depends on your refrigerator model and the fittings it uses. Check your manual and the listing before changing the setup.
How often should an internal filter be replaced?
The GE XWFE and everydrop Filter 1 listings state a 6 month replacement interval. The Frigidaire listing describes a 6 month reminder on some refrigerators that must be reset per the manual. Follow the interval your refrigerator manual and the filter listing state.
Do inline filters remove the same things as internal filters?
The listings state different certifications. The Frigidaire listing names NSF/ANSI 42, 53 and 401, while the EcoPure EPINL30 and Waterdrop INL listings name NSF/ANSI 42, and the Waterdrop listing also names NSF 372. Read the performance data for each listing to compare what it states.
What fittings do inline filters need?
The inline listings here describe 1/4 inch compression and push to connect fittings, and the Membrane Solutions kit also lists 3/8 inch adapters. Check your water line size and the listing before installing. If the listing does not state your fitting size, check the manual.
Where do I find the part number for my filter?
The part number is usually printed on the old filter cartridge or in the refrigerator manual. The listings in this guide name part numbers such as ULTRAWF, XWFE, EDR1RXD1 and several inline replacement numbers. Match that number to the listing and confirm with your model number.
This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.
Next step: See the XWFE filter page for the genuine part and the models it fits.
More on this topic: How to Choose and Match a Refrigerator Water Filter
Related guides
Browse all refrigerator water filter guides
