MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Reset Frigidaire Water Filter Light

The filter light on most Frigidaire refrigerators does not clear on its own after a filter change. Here is how the reset works and what to check before you buy a replacement.

On most Frigidaire refrigerators the water filter reminder light does not turn off by itself after you install a new filter. The ULTRAWF listing says most models are reset by pressing and holding the Water Filter button on the dispenser control panel for about 3 seconds, and the display changes from red to green when the status clears. The WF3CB listing describes the same button and the same red to green change.

  1. 1Part on your old filterFrigidaire EPTWFU01Printed on the cartridge label
  2. 2Also sold asEWF02; 012505454226Same filter, other part numbers or pack sizes
  3. 3ReplaceEvery 6 months (about 125 gallons)Sooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: EPTWFU01 (PureSource Ultra II)
How the Frigidaire EPTWFU01 matches the EPTWFU01 (PureSource Ultra II) filter. Diagram: MatchMyFilter, from our filter map (source: Frigidaire and EXCELPURE Amazon listings; Filters Fast).

Before you reset anything, confirm which filter your refrigerator actually uses. Check the model number on the refrigerator label and compare it with the part number printed on the old filter or in your Use and Care Guide. The listings below name different part numbers, so the model number is what tells you which one applies to your fridge.

Filters we compared for EPTWFU01

1
Homenjoy HEY016 Frigidaire FPPWFU01 3-Pack

Homenjoy HEY016 Frigidaire FPPWFU01 3-Pack

Homenjoy

A three-pack of replacement cartridges for Frigidaire refrigerators that use the FPPWFU01 or PWF-1 filter. The listing states NSF/ANSI 42 and 372 (not yet checked by us). A sensible pick for households that want a spare supply and fewer reorders.

Reasons to buy

  • Three cartridges per pack, each rated for 6 months or 200 gallons, which covers about 18 months of typical use
  • The listing states NSF/ANSI 42 and 372 (not yet checked by us).
  • Tool-free installation and a top sealing ring designed to prevent leaks
  • Rated to 400 PSI burst pressure and 100,000 water hammer cycles for steady performance
  • BPA-free food-grade ABS construction

Reasons to avoid

  • Compatibility is limited to Frigidaire models that take FPPWFU01, EPPWFU01, or PWF-1 cartridges
  • The listing states NSF/ANSI 53, 42 and 372 (not yet checked by us).
2
Frigidaire EPTWFU01 PureSource Ultra II Filter

Frigidaire EPTWFU01 PureSource Ultra II Filter

Frigidaire

A two-pack of Frigidaire's genuine EPTWFU01 replacement filter for select Frigidaire and Electrolux refrigerators. The listing states NSF/ANSI 42, 53 and 401 (not yet checked by us). A sensible pick for owners of compatible models who want the manufacturer's own filter rather than a third-party knockoff.

Reasons to buy

  • Genuine Frigidaire part with the berry-colored design and Genuine Filters seal to help confirm authenticity
  • The listing states NSF/ANSI 42, 53 and 401 (not yet checked by us).
  • Carbon fiber construction rated to reduce up to 99% of contaminants per the manufacturer
  • Two-pack format covers a full replacement cycle and cuts plastic versus bottled water
  • Wide compatibility list covering many Frigidaire and Electrolux refrigerator model numbers

Reasons to avoid

  • Only fits the specific refrigerator model numbers listed, so buyers must verify compatibility before ordering
  • Installation requires pushing firmly and turning 90 degrees until the filter snaps, which may be awkward for some users
3
Frigidaire ULTRAWF PureSource Ultra Refrigerator

Frigidaire ULTRAWF PureSource Ultra Refrigerator

Frigidaire

The Frigidaire ULTRAWF is a genuine OEM replacement filter for Frigidaire refrigerators with the PureSource Ultra system. It uses a carbon block to reduce chlorine taste and odor plus contaminants like lead, nitrates, pesticides, and mercury, and it is certified to NSF/ANSI 42, 53, and 401. Installation is tool-free: push to release the old filter, push the new one until it clicks, and run water for three minutes to prime. A solid choice for owners who want a factory-certified filter and a straightforward swap.

Reasons to buy

  • Genuine Frigidaire filter certified to NSF/ANSI 42, 53, and 401 for chlorine taste and odor, lead, mercury, and other contaminants
  • Tool-free push-to-release and click-in installation with a simple three-minute priming step
  • Carbon block construction (polyethylene and extruded carbon) for reliable filtration
  • WQA certified for sustainability under WQA/ASPE/ANSI S 803

Reasons to avoid

  • Designed only for Frigidaire refrigerators with the PureSource Ultra filter system, so it will not fit other brands or systems
  • The six-month filter reminder light does not reset automatically and must be manually cleared per the refrigerator manual
4
Frigidaire PWF-2 PurePour Connect Water Filter

Frigidaire PWF-2 PurePour Connect Water Filter

Frigidaire

The Frigidaire PWF-2 is a genuine replacement water and ice filter for select Frigidaire refrigerators. It reduces up to 99% of contaminants, including lead, mercury, and pharmaceuticals, and its PurePour Connect technology helps ensure you are installing a real filter while tracking replacement intervals. The listing states a certification (not yet checked by us).

Reasons to buy

  • The listing states NSF/ANSI 42, 53 and 401 (not yet checked by us).
  • PurePour Connect technology verifies genuine filter installation and alerts on counterfeits or incorrect models
  • Built in filter replacement tracking works with select refrigerator models to monitor the six month or 125 gallon schedule
  • Reduces up to 99% of contaminants including chlorine taste and odor, lead, mercury, pesticides, BPA, and pharmaceuticals
  • Lasts up to six months, cutting plastic waste and the cost of bottled water

Reasons to avoid

  • Compatibility is limited to select Frigidaire refrigerator models, so owners of other brands or older models should verify fit first
  • Filter replacement notifications and app integration only work with certain refrigerator models
5
Frigidaire FRIGCOMBO13 Water & Air Filter Kit

Frigidaire FRIGCOMBO13 Water & Air Filter Kit

Frigidaire

A two piece refresh kit for Frigidaire refrigerators that pairs the PurePour PWF-1 water filter with the PureAir Ultra II air filter. The listing states NSF/ANSI 42, 53 and 401 (not yet checked by us). A practical pick for owners who want to replace both filters in one order.

Reasons to buy

  • The listing states NSF/ANSI 42, 53 and 401 (not yet checked by us).
  • Bundles the water and air filter together, so both fridge filters can be swapped in one step
  • Genuine Frigidaire parts made by Electrolux for a direct fit

Reasons to avoid

  • Only fits Frigidaire refrigerators that use the PWF-1 and PAULTRA2 filter models
  • Plastic construction and single unit count mean no spare filter in the box
6
Frigidaire PurePour PWF-1 & PureAir AF-2 Combo Kit

Frigidaire PurePour PWF-1 & PureAir AF-2 Combo Kit

Frigidaire

This combo pairs Frigidaire's PurePour PWF-1 water filter with the PureAir AF-2 air filter, covering both the water you drink and the air inside your fridge. The water filter is NSF certified to reduce chlorine, lead, cysts, and emerging contaminants, while the air filter uses carbon technology to keep odors at bay for up to six months. A practical pick for Frigidaire owners who want genuine filters and fewer replacements.

Reasons to buy

  • Water filter certified to NSF/ANSI 42, 53, and 401 for reduction of chlorine, lead, cysts, and emerging contaminants
  • Air filter uses carbon technology to capture odors and maintain freshness for up to 6 months
  • Genuine Frigidaire filters with authenticity seal for reliable fit and performance
  • Combo kit simplifies buying both filters in one purchase

Reasons to avoid

  • Water filter rated capacity is 125 gallons, so heavy users may need replacements sooner
  • Plastic construction may not appeal to those seeking more sustainable materials
7
TEEHAY TH-04 WF3CB Water Filter 2-Pack

TEEHAY TH-04 WF3CB Water Filter 2-Pack

TEEHAY

A two-pack replacement filter for Frigidaire PureSource3 refrigerators, including models like FFHS2622MS and FFSS2625TS. It is NSF/ANSI 42 certified and rated to reduce 99% of lead and chlorine taste and odor, with a twist-and-lock design for tool-free changes. A practical pick for households that want a six-month supply and a straightforward install.

Reasons to buy

  • Two filters per pack cover a full year at the recommended six-month replacement interval
  • Certified to NSF/ANSI 42 and rated to reduce 99% of lead plus chlorine taste and odor
  • Twist-and-lock installation is tool-free and designed to be mess-free
  • BPA-free, food-grade, lead-free materials
  • Listed as compatible with a range of Frigidaire PureSource3 models, including FFHS2622MS, FFSS2625TS, and FFSS2615TS

Reasons to avoid

  • Compatibility is limited to specific Frigidaire PureSource3 models, so owners of other refrigerator brands should verify fit first
  • Replacement is tied to a six-month or 200-gallon schedule, which may come sooner than expected in high-use households
8
Frigidaire WF3CB PureSource 3 Water Filter

Frigidaire WF3CB PureSource 3 Water Filter

Frigidaire

The Frigidaire WF3CB is the OEM replacement filter for select Frigidaire refrigerators, using extruded carbon media certified to NSF/ANSI 42 and 53. It reduces chlorine taste and odor, lead, mercury, cysts, and a long list of other contaminants, with a 200-gallon capacity and a push-to-lock installation. A solid pick for owners who want the exact factory filter and straightforward 9-inch fit, not the longer ULTRAWF model.

Reasons to buy

  • NSF/ANSI 42 and 53 certified for aesthetic and health-related contaminant reduction
  • Reduces up to 99% of contaminants including lead, mercury, cysts, pesticides, and pharmaceuticals
  • 200-gallon rated capacity with a filter indicator light
  • Push-to-lock design simplifies replacement
  • Genuine Frigidaire part with authenticity seal on packaging

Reasons to avoid

  • Compatible with only specific Frigidaire models, such as DGUS2635LP, and not the longer ULTRAWF fit
  • Refrigerator reminder light does not reset automatically and must be manually cleared

How to choose a filter for your Frigidaire reset

Match the part number the listing names

The listings name specific part numbers, and that is the first thing to compare with your old filter. The Homenjoy FPPWFU01 replacement names FPPWFU01, PWF-1 and EPPWFU01, while the Frigidaire EPTWFU01 listing names the EPTWFU01 filter. The Frigidaire ULTRAWF listing names the ULTRAWF filter, and the Frigidaire WF3CB listing names the WF3CB filter and notes it is 9 inches long and not to be confused with the longer ULTRAWF.

Check what the listing says about certification

Certification statements differ from listing to listing, so read them rather than assuming they are the same. The Frigidaire PurePour PWF-1 listing says it is tested and certified by NSF International against NSF/ANSI Standards 42, 53 and 401, and the ULTRAWF listing makes the same statement. The TEEHAY WF3CB listing says it is NSF/ANSI 42 certified. Where a listing does not state a certification, check the listing and your refrigerator manual before you buy.

Compare the replacement interval each listing states

Replacement intervals in the data are not all the same, which matters because the reminder light is tied to filter life. The Homenjoy listing says each filter lasts 6 months or 200 gallons, and the TEEHAY listing gives the same 6 months or 200 gallons. The Frigidaire PWF-2 listing says every 6 months or 125 gallons, and the PurePour PWF-1 listing states a rated capacity of 125 gallons. The WF3CB listing states a rated capacity of 200 gallons. Follow the interval for the filter you actually install, and check your manual if the listing is silent.

Decide on pack size and what is in the box

Pack size varies across these listings, so count what you need before ordering. The Homenjoy listing is a 3 pack, the Frigidaire EPTWFU01 listing is a set of 2, and the TEEHAY WF3CB listing is a 2 pack. The Frigidaire PWF-2 and ULTRAWF listings are 1 count each. Two listings are combo kits: the FPPWFU01 and PAULTRA2 kit includes a water filter and an air filter, and the PurePour PWF-1 and AF-2 kit pairs a water filter with an air filter as well.

Confirm what the listing says it fits

Fit statements are written by the seller, so read them closely against your own refrigerator. The Homenjoy listing says it is compatible with Frigidaire refrigerators that use FPPWFU01, PWF-1 or EPPWFU01. The Frigidaire PWF-2 listing says its PurePour Connect technology shows an error message on the control panel if a counterfeit or incorrect filter is installed. The TEEHAY listing describes universal compatibility without naming models, so check the listing and your manual before relying on it.

Check before you buy

Find the refrigerator model number on the label inside the fresh food compartment or on the frame, then compare it with the part number on your old filter. Our guide to finding your refrigerator model number walks through where the label usually sits. You can also use the filter finder to match a model number to a part number. Write both numbers down before you order so you can compare them with the listing.

How we choose what to list

We read manufacturer information and the product listings and list filters by the part numbers and statements those sources provide. We do not run lab tests, so treat certification and fit claims as statements from the seller and confirm them against your manual.

  1. 1Part on your old filterSamsung DA29-00020BPrinted on the cartridge label
  2. 2Same part asHAF-CIN/EXPAlso sold as DA29-00020B; DA29-00020A
  3. 3ReplaceEvery 6 months or 300 gallonsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: HAF-CIN/EXP
How the Samsung DA29-00020B matches the HAF-CIN/EXP filter. Diagram: MatchMyFilter, from our filter map (source: Amazon listings and reseller compatibility lists. HAF-CIN does not fit HAF-QIN refrigerators).

Evaluating Genuine Frigidaire vs Compatible Filters

Reasons to buy genuine Frigidaire OEM filters

Genuine Frigidaire water filters (including PureSource Ultra II EPTWFU01 and PurePour PWF-1) feature verified NSF 42, 53, and 401 certifications. Their precision slide-and-click locking base ensures a tight manifold connection that eliminates water hammer noise and air sputtering in the dispenser line.

Reasons to avoid uncertified knockoffs

Generic replacement cartridges often lack structural pressure testing and may use inconsistent carbon blocks. Loose fitting neck collars can lead to slow water trickles or sudden disconnection under municipal water pressure surges.

Compatible Filter Families & Maintenance Resources

Explore complete refrigerator model compatibility in our Frigidaire EPTWFU01 filter guide.

Read our essential tutorial on how to flush a new refrigerator water filter, or see our diagnostics guide if your refrigerator water filter will not fit.

FAQ

Why does the filter light stay on after I change the filter?

The reminder light does not turn off automatically on most Frigidaire models, according to the ULTRAWF and WF3CB listings. Press and hold the Water Filter button on the dispenser control panel for about 3 seconds and watch for the display to change from red to green.

Where is the Water Filter reset button?

The listings place it on the dispenser control panel. Button layout can differ between models, so check your Use and Care Guide if you do not see a Water Filter button there.

Does the reset work with any replacement filter?

The reset instructions in the data are tied to the refrigerator control panel, not to a specific filter brand. The PWF-2 listing does say its PurePour Connect technology shows an error message if a counterfeit or incorrect filter is installed, so use a filter that matches your model.

How often should I replace the filter?

Intervals in the listings range from 6 months or 125 gallons to 6 months or 200 gallons. Use the interval stated for the filter you install, and check your refrigerator manual if the listing does not state one.

What if the light does not reset after holding the button?

The data does not cover that case. Check your Use and Care Guide for the reset procedure for your specific model, since the button and display behavior can vary.

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

More on this topic: Refrigerator Water Filter Problems: Slow Water, Bad Taste, Fit and Light Issues

About the author

MatchMyFilter Editorial
MatchMyFilter Editorial

MatchMyFilter is a small independent team that matches refrigerator models to the water filters that fit them. We do not lab-test filters. For every filter page we check three things against public sources: which models a filter fits (maker part lists and model labels), what certification a product states (the Amazon listing or the maker's spec page), and whether that certification shows up in the certifier's own database (NSF, IAPMO or WQA) for that exact model. Each product row shows where a claim comes from and the date we last checked it. When a listing changes, we update the page and the date. How we check: /methodology/. Editorial rules: /editorial-policy/. As an Amazon Associate we earn from qualifying purchases.