MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

GE MWF Review: Genuine vs Compatible Filters

A GE MWF review that explains what the genuine part and the compatible replacements say about certifications, pack size, and fit. Check your model number and part number before you buy.

The choice is between the genuine GE MWF filter and a compatible replacement. The listings name the same MWF family but differ in pack size, stated certifications and replacement interval. Check your model number and the part number on the filter you remove, then compare.

Sources: the listings below and their certification details, checked on 13 Nov 2026 where shown.

A GE MWF review starts with one question: should you buy the genuine GE MWF filter or a compatible replacement? The listings in this guide name the same MWF family, but they differ in pack size, stated certifications, and replacement interval.

  1. 1Part on your old filterGE MWFPrinted on the cartridge label
  2. 2Also sold asMWFP; MWFA; GWF; SmartWaterSame filter, other part numbers or pack sizes
  3. 3ReplaceEvery 6 months or 300 gallonsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: MWF
How the GE MWF matches the MWF filter. Diagram: MatchMyFilter, from our filter map (source: GE and Waterdrop Amazon listings; Sears Parts Direct cross-reference).

Before you choose, check two things on your refrigerator: the model number and the part number printed on the filter you remove. Then compare those numbers with what each listing says it fits.

Filters we compared for MWF

1
Waterdrop WD-F13 GE MWF Compatible Filter, 3-Pack

Waterdrop WD-F13 GE MWF Compatible Filter, 3-Pack

GE

This Waterdrop three-pack is a third-party replacement for GE MWF and related refrigerator filters, including MWFP, MWFA, GWF, and SmartWater models. Its Waterdrop listing states NSF 42 and NSF 372 certification, not NSF 53, and the stated replacement interval is six months or 300 gallons. A sensible pick for households that want a multi-pack of certified compatible filters for GE refrigerators.

Reasons to buy

  • Three-pack format covers a full 18 months of filter changes at the listed six-month interval
  • NSF 42 and NSF 372 certifications per the Waterdrop listing
  • Compatible with a wide range of GE MWF family filters, including MWFP, MWFA, GWF, and SmartWater

Reasons to avoid

  • Third-party compatible part rather than a genuine GE OEM filter
  • Replacement interval of six months or 300 gallons means frequent changes
2
Waterdrop Plus WDP-F13 Refrigerator Filter

Waterdrop Plus WDP-F13 Refrigerator Filter

Waterdrop

The listing states NSF/ANSI 401, 53, 42 and 372 (not yet checked by us). It is designed to reduce lead, PFOA/PFOS, and other contaminants while preserving beneficial minerals, and its coconut shell carbon block construction supports fast flow without leaks. This is the seller's claim, not verified by us. The listing states a certification (not yet checked by us).

Reasons to buy

  • The listing states NSF/ANSI 401, 53, 42 and 372 (not yet checked by us).
  • Coconut shell carbon block with enlarged surface area and micropores improves contaminant reduction and allows beneficial minerals to pass through.
  • Engineered for a precise fit and fast water flow, reducing the leak risk common in inferior replacement filters.
  • The listing states NSF/ANSI 372 (not yet checked by us).
  • Complimentary installation stickers help track the recommended 6-month or 300-gallon replacement interval.

Reasons to avoid

  • Replacement is recommended every 6 months or 300 gallons, which may be frequent for high-use households.
  • Only compatible with specific GE, Kenmore, and other listed refrigerator models, so buyers must verify their model before purchase.
3
GE MWF Refrigerator Water Filter

GE MWF Refrigerator Water Filter

GE

The GE MWF is a genuine replacement filter for select GE French door, side-by-side, and built-in refrigerators, including GE Profile, Café, and Monogram models. GE product page lists NSF/ANSI 42 and 53; the listing says it reduces over 70 impurities such as lead, chlorine, PFOA/PFOS, microplastics, and five trace pharmaceuticals. Installation is tool-free and does not require shutting off the water, and the filter should be replaced every six months. It suits owners of compatible GE refrigerators who want a certified, guaranteed-fit filter.

Reasons to buy

  • Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, PFOA/PFOS, microplastics, and select pharmaceuticals
  • Guaranteed fit for select GE, GE Profile, Café, and Monogram refrigerators
  • Tool-free installation with no water shutoff required
  • Six-month filter life with Subscribe & Save option for automatic replacement

Reasons to avoid

  • Compatible only with select GE refrigerator models, not universal
  • Requires replacement every six months to maintain filtration performance
4
Mutital MWF 3-Pack Refrigerator Water Filter

Mutital MWF 3-Pack Refrigerator Water Filter

Mutital - ExcellenceinFilter

The listing states NSF/ANSI 372 (not yet checked by us). It targets chlorine, sediment, and taste and odor issues while keeping beneficial minerals, and the twist-and-lock design matches the original filter fit. A sensible pick for households that want to stock up on replacements without paying OEM prices.

Reasons to buy

  • The listing states NSF/ANSI 372 (not yet checked by us).
  • Coconut shell activated carbon block reduces chlorine, sediment, bad taste, and odor while retaining beneficial minerals
  • Twist-and-lock design is engineered to match original filter specs for tool-free, leak-free installation
  • Broad MWF-series compatibility, including GE MWF, MWFP, MWFA, GWF, HWF, and Kenmore 46-9991 models
  • Three-pack format covers up to 18 months of filtration at a 6-month or 300-gallon replacement cycle

Reasons to avoid

  • The listing states NSF/ANSI 372, 42 and 53 (not yet checked by us).
  • Buyers must verify their original filter model before purchase, since compatibility varies across MWF-series and Kenmore units
5
Waterdrop WDP-F13 Replacement Filter (3-Pack)

Waterdrop WDP-F13 Replacement Filter (3-Pack)

Waterdrop

The listing states NSF/ANSI 401, 53, 42 and 372 (not yet checked by us). Built with coconut shell carbon blocks and leak-resistant engineering, it fits a long list of GE and Kenmore refrigerators. The listing states a certification (not yet checked by us).

Reasons to buy

  • The listing states NSF/ANSI 401, 53, 42 and 372 (IAPMO) (not yet checked by us).
  • The listing states NSF/ANSI 372 (not yet checked by us).
  • Engineered for fast water flow and leak resistance, with microscopic pore sizes for smooth filtration
  • Three-pack provides a six-month supply at a budget-friendly price point, with installation stickers for replacement tracking
  • Wide compatibility with many GE and Kenmore refrigerator models, including GWF, MWF, and 46-9991 series

Reasons to avoid

  • Replacement is recommended every 300 gallons or six months, which may come sooner in areas with poor water quality
  • No verified buyer reviews are available to confirm real-world performance or fit across all listed models

How to Choose a GE MWF Replacement

Part numbers and models named in the listing

The GE MWF genuine listing says it is the OEM part for the MWF filter and also names MWFP, MWFA, GWF, and SmartWater. The Waterdrop WD-F13 for GE MWF (3 pack) listing says it is a third-party compatible part for the same MWF family and repeats those alternate names.

The Water Filter Cartridges, Replacement for GE MWF listing names a longer set: MWF, MWFP, MWFA, MWFAP, MWFINT, GWF, GWF01, GWF06, GWFA, HWF, HWFA, FMG, FMG-1, and SmartWater models, plus Kenmore numbers 46-9991, 46 9991, 469991, and 9991.

What the listings say about certifications

The GE MWF product page lists NSF/ANSI 42 and 53, and the Waterdrop WD-F13 for GE MWF (3 pack) listing states NSF 42 and 372. The Waterdrop Plus WDP-F13 listings state NSF and IAPMO certification against NSF/ANSI 401, 53, 42, and 372, with specific reduction claims for substances such as lead, benzene, mercury, and PFOA and PFOS.

The Water Filter Cartridges, Replacement for GE MWF listing states NSF/ANSI 372 certification for lead-free materials and a BPA-free, food-grade housing. Where a listing does not state a certification, check the listing page and your refrigerator manual before you rely on it.

Replacement interval stated by each listing

The GE MWF genuine listing and the Waterdrop WD-F13 for GE MWF (3 pack) listing both state a replacement interval of 6 months or 300 gallons. The Waterdrop Plus WDP-F13 listings state the same 6 months or 300 gallons, described as 4800 cups of water, and note that the interval may vary with local water conditions.

The Water Filter Cartridges, Replacement for GE MWF listing states up to 6 months or 300 gallons depending on water quality and usage, and advises flushing a new filter before first use. Follow the interval your own manual gives if it differs.

Pack size and what each listing says it fits

Two listings are single filters: the GE MWF genuine and the Waterdrop Plus WDP-F13 Water Filter. Two listings are three packs: the Waterdrop WD-F13 for GE MWF (3 pack) and the Water Filter Cartridges, Replacement for GE MWF. The Waterdrop Plus WDP-F13 Water Filter also appears as a 3 pack in the data.

For fit, the GE MWF genuine listing identifies itself as the OEM part for the MWF filter. The compatible listings describe themselves as replacements for the MWF family and, in the Mutital listing, for the additional models and Kenmore numbers named above.

Check Before You Buy

Write it down, then remove the current filter and note the part number printed on it. Match both numbers against the listing text before ordering, using our guide to finding your refrigerator model number. You can also start with the filter finder to narrow the options.

How We Choose What to List

We read manufacturer information and the product listings, then list the part numbers, certifications, and intervals each source states. We do not run lab tests, so treat every claim here as the listing’s statement rather than our own result.

Reading Fit Claims on a GE MWF Replacement

A fit claim on a listing is a statement about which part numbers and refrigerator models the seller says the filter matches. It is not a promise that the filter will seat correctly in your particular refrigerator. The listings in this guide describe the MWF family in different levels of detail, so read the compatibility text closely rather than relying on the product title alone.

The Waterdrop Plus WDP-F13 listing goes further than the others by naming specific refrigerator models, including GSL, GSS, HSS, PCP, PFCS, PFSF, PFSS, PGCS, PIE, PIT, PSE, PSK, PSS, PST, and PZS series numbers. If your model appears in that list, the listing states it is compatible. If it does not appear, that absence is not proof of incompatibility, but it does mean you should confirm with the seller before ordering.

Why the Same Filter Has Several Names

The MWF filter is sold under several names. The GE MWF genuine listing and the Waterdrop WD-F13 listing both name MWFP, MWFA, GWF, and SmartWater as alternate names for the same filter. The Mutital listing adds MWFAP, MWFINT, GWF01, GWF06, GWFA, HWF, HWFA, FMG, and FMG-1. A filter printed with one of these names may still be the correct match for your refrigerator.

What to Do When Your Model Is Not Listed

Write down your refrigerator model number and the part number on the filter you remove. Compare both against the listing text. If neither appears, contact the seller and ask them to confirm the match in writing before you buy. Keep that confirmation with your order records in case the filter does not fit.

Common Mistakes When Buying a GE MWF Filter

The most common mistake is ordering by the refrigerator brand alone. The sources do not state that GE made many refrigerators using different filters. The model number and the old filter part number are the details that narrow the choice.

A second mistake is assuming every compatible listing carries the same certifications. The GE MWF product page lists NSF/ANSI 42 and 53, and the Waterdrop WD-F13 listing states NSF 42 and 372. The Waterdrop Plus WDP-F13 listing states NSF and IAPMO certification against NSF/ANSI 401, 53, 42, and 372. The Mutital listing states NSF/ANSI 372 for lead-free materials. These are different scopes, so read the certification section of the listing you are considering.

Mixing Up Pack Sizes

Some listings are single filters and some are three packs. Check the pack size in the listing title before you order so you receive the quantity you expect. A three pack may suit a household that replaces the filter on schedule, while a single filter suits someone who wants to try one first.

Skipping the Flush

The Mutital listing advises flushing a new filter before first use. Follow the installation steps that come with your filter and the guidance in your refrigerator manual, since the listings do not all describe the same procedure.

When to Replace Your GE MWF Filter

The listings in this guide state a replacement interval of 6 months or 300 gallons. The Waterdrop Plus WDP-F13 listing describes that as 4800 cups of water and notes the interval may vary with local water conditions. The Mutital listing likewise ties the interval to water quality and usage.

The Waterdrop Plus WDP-F13 listing warns that running a filter past its recommended date can let impurities accumulate and cause filtration performance to suffer. It also supplies installation stickers so the replacement date is visible. If your refrigerator manual gives a different interval, follow the manual.

  1. 1Part on your old filterGE XWFEPrinted on the cartridge label
  2. 2Also sold asXWFE with built-in chipSame filter, other part numbers or pack sizes
  3. 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: XWFE
How the GE XWFE matches the XWFE filter. Diagram: MatchMyFilter, from our filter map (source: GE and Waterdrop Amazon listings. XWFE has a built-in chip; the older XWF is a different filter).

FAQ

Is the GE MWF genuine filter the same as a compatible replacement?

No. The GE MWF genuine listing describes an OEM part, while the Waterdrop and Mutital listings describe third-party compatible parts for the MWF family. The stated certifications and pack sizes differ between them.

How often should I replace a GE MWF filter?

The listings in this guide state 6 months or 300 gallons, with the Mutital listing noting that the interval depends on water quality and usage. Check your refrigerator manual for the interval that applies to your model.

Which part numbers does the Mutital listing say it replaces?

The listing names MWF, MWFP, MWFA, MWFAP, MWFINT, GWF, GWF01, GWF06, GWFA, HWF, HWFA, FMG, FMG-1, and SmartWater models, plus Kenmore 46-9991, 46 9991, 469991, and 9991. Confirm your own part number against that list before ordering.

Do the compatible listings state the same certifications as the genuine part?

Not always. The genuine listing states NSF 42 and 53, the Waterdrop WD-F13 listing states NSF 42 and 372, the Waterdrop Plus listings state NSF/ANSI 401, 53, 42, and 372, and the Mutital listing states NSF/ANSI 372. Read each listing’s certification section for the exact wording.

Where do I find my refrigerator model number?

Look for the label inside the refrigerator compartment or on the frame behind the door. Our guide to finding the model number walks through the common label locations.

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

Reasons to Buy and Reasons to Avoid

When selecting a replacement cartridge, base your decision on verifiable specifications rather than marketing claims:

  • Reasons to buy: Genuine or verified compatible filters provide documented reduction of chlorine taste and odor, utilize precision-molded locking tabs that prevent leaks into the refrigerator cabinet, and offer multi-pack bundles that reduce annual replacement expenses.
  • Reasons to avoid: Uncertified cartridges with missing certification marks often fail to seat cleanly, risk cracking internal manifold connections, and do not provide verified lead or cyst filtration.
Next Step: Check the part number printed on your current cartridge or compare your refrigerator model in our Filter Finder before ordering.

More on this topic: OEM vs Compatible Refrigerator Water Filters: Part Comparisons by Brand

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.