Refrigerator Water Filter for Old Refrigerator: How to Match
Old refrigerators often use a specific filter part number. This guide shows how to match your model to the right replacement.
Part of our guide: Choosing and matching a filter
If you have an old refrigerator, the right water filter is the one that matches the part number your fridge was built to use. Many older models use a specific filter, such as the EDR1RXD1 (Filter 1), which is also sold as W10295370A. The key is to confirm your refrigerator model and the filter part number before you buy.
- 1Part on your old filterWhirlpool EDR1RXD1Printed on the cartridge label
- 2Also sold asW10295370A; everydrop Filter 1Same filter, other part numbers or pack sizes
- 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
- 4Before you orderMatch the part numberOn the box or listing: EDR1RXD1 (Filter 1)
The refrigerator model number helps identify which filter fits. The old filter itself can help identify the replacement part. Matching both ensures you get a filter that fits and works as intended.
Filters we compared for EDR1RXD1
everydrop by Whirlpool Filter 1 (EDR1RXD1)
Genuine (OEM) part for the EDR1RXD1 (Filter 1) refrigerator water filter. everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1.
How to Choose a Refrigerator Water Filter for Old Refrigerator
Part numbers and models the listing names
The listing for everydrop by Whirlpool Filter 1 (EDR1RXD1) names the part numbers EDR1RXD1, Filter 1, and W10295370A. It also states that it fits Whirlpool, Maytag, Amana, KitchenAid, and JennAir models that use Filter 1. If your old refrigerator is one of these brands, check whether your manual or old filter shows one of these part numbers.
Certifications and replacement interval
The seller states that this filter is certified to NSF 42, 53, and 401. The listing also gives a replacement interval of 6 months. These details come from the everydrop listing, so verify them on the product page and in your refrigerator manual. If your manual specifies a different interval, follow the manual.
Pack size
The listing information we checked does not state a pack size for this filter. Check the listing to see whether it is sold as a single filter or in a multi pack. If you need more than one, confirm the quantity before ordering.
What the listing says it fits
The listing says this filter fits Whirlpool, Maytag, Amana, KitchenAid, and JennAir models that use Filter 1. It does not provide a complete model list, so you should check your refrigerator manual or use a model number look up tool. Do not assume it fits just because your refrigerator is the same brand.
Genuine OEM part
This is a genuine OEM part for the EDR1RXD1 filter, according to the listing. OEM means it is made by the original manufacturer. If you prefer a genuine part, this is one option to consider, but always confirm compatibility with your model.
Check Before You Buy
Find your refrigerator model number on the label inside the fridge or on the door frame. Then look up that model in your owner’s manual or on the manufacturer’s website to find the correct filter part number. You can also use our guide to find your refrigerator model number for step by step help. Once you have the part number, compare it to the part numbers listed for the filter, or try our filter finder to match your model.
Frequently Asked Questions
Will this filter fit my old refrigerator?
It fits models that use Filter 1, according to the listing. Check your refrigerator manual or the old filter for the part number EDR1RXD1, Filter 1, or W10295370A. If your manual lists a different part number, this filter may not fit.
How often should I replace the filter?
The listing states a replacement interval of 6 months. Your refrigerator manual may give a different recommendation, so follow the manual if it differs. Some refrigerators may have features that help with filter replacement.
Is this a genuine OEM filter?
Yes, the listing describes it as a genuine OEM part for the EDR1RXD1 filter. OEM means it is made by the original manufacturer. Always confirm the part number matches your refrigerator.
What certifications does this filter have?
The seller states that it is certified to NSF 42, 53, and 401. The filter carries certifications for reducing certain contaminants. You can read more about what these certifications mean in our article on NSF/ANSI 42 vs 53.
What if the filter does not fit or the light does not reset?
Double check the model number and part number first. If the filter is correct but the light will not reset, see our guide on what to check when a new filter won’t fit or the light won’t turn off. Installation may affect how the filter works.
How to Match the Filter to Your Old Refrigerator Model
The most reliable way to match a filter to an older refrigerator is to work from the model number, not from the brand name alone. The listing for everydrop by Whirlpool Filter 1 states that it fits Whirlpool, Maytag, Amana, KitchenAid, and JennAir models that use Filter 1, but it does not provide a complete model list. That means the brand on the door is only a starting point. Two refrigerators from the same brand can take different filters.
Once you have the model number from the label inside the fresh food compartment or on the door frame, look it up in the owner's manual or on the manufacturer's support page. The manual should name the filter part number your refrigerator was built to use. Compare that number to the ones the listing names: EDR1RXD1, Filter 1, and W10295370A. If the numbers match, you have a strong signal that the filter is the right one.
If the manual is long gone, the old filter itself can help. Pull it out and look for a part number printed on the housing or the label. A number that matches one of the listed part numbers is a good sign. If the old filter shows a different number, treat that as a warning and keep looking rather than ordering on the assumption that a similar looking filter will work.
What to Check Before You Buy
Before ordering, confirm the pack size on the product page. The listing information we checked for this filter does not state whether it is sold as a single filter or in a multi pack, so check the quantity shown in the listing. If you plan to keep a spare on hand, make sure you know how many filters you are actually getting.
Read the certification and replacement details on the product page as well. The seller states that this filter is certified to NSF 42, 53, and 401 and lists a replacement interval of 6 months. These are claims from the listing, so verify them there and compare them with your refrigerator manual. If your manual gives a different replacement interval, follow the manual.
Finally, confirm that the part is described as a genuine OEM part for the EDR1RXD1 filter. OEM means it is made by the original manufacturer. If you prefer a genuine part, that description matters, but it does not replace the step of checking your model number against the part numbers the listing names.
Common Mistakes When Buying a Filter for an Older Fridge
The most common mistake is buying by brand alone. A filter that fits one Whirlpool, Maytag, Amana, KitchenAid, or JennAir model that uses Filter 1 will not necessarily fit another model from the same brand. The listing does not provide a complete model list, so the model number check is the step that protects you.
Another mistake is skipping the manual when the filter seems to fit physically. A filter can look right and still not be the part your refrigerator was built to use. Check the part number in the manual or on the old filter before you order, and use our guide to finding your refrigerator model number or our filter finder if you need help locating the right number.
A third mistake is ignoring the replacement schedule. The listing gives a 6 month interval, and some refrigerators also have a filter indicator light. If the light comes on or the interval passes, plan to replace the filter. If a new filter will not fit or the light will not reset, recheck the model and part number first, then review the installation and reset steps in your manual.
- 1Part on your old filterWhirlpool W10295370APrinted on the cartridge label
- 2Same part asEDR1RXD1 (Filter 1)Also sold as W10295370A; everydrop Filter 1
- 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
- 4Before you orderMatch the part numberOn the box or listing: EDR1RXD1 (Filter 1)
This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.
Reasons to Buy and Reasons to Avoid
When selecting a replacement cartridge, base your decision on verifiable specifications rather than marketing claims:
- Reasons to buy: Genuine or verified compatible filters provide documented reduction of chlorine taste and odor, utilize precision-molded locking tabs that prevent leaks into the refrigerator cabinet, and offer multi-pack bundles that reduce annual replacement expenses.
- Reasons to avoid: Uncertified cartridges with missing certification marks often fail to seat cleanly, risk cracking internal manifold connections, and do not provide verified lead or cyst filtration.
More on this topic: How to Choose and Match a Refrigerator Water Filter
Related guides
Browse all refrigerator water filter guides
