MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

Where Is My Refrigerator Water Filter Located?

Find your refrigerator water filter by checking the model number and the part number on the old filter. This guide covers common locations and how to match a replacement.

Your refrigerator water filter is usually inside the fridge compartment, often in the back upper corner, in the ceiling, or behind a small cover in the produce area. Some models place it in the base grille at the bottom front, and others use an inline filter behind the fridge on the water line.

  1. 1Part on your old filterWhirlpool EDR1RXD1Printed on the cartridge label
  2. 2Also sold asW10295370A; everydrop Filter 1Same filter, other part numbers or pack sizes
  3. 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: EDR1RXD1 (Filter 1)
How the Whirlpool EDR1RXD1 matches the EDR1RXD1 (Filter 1) filter. Diagram: MatchMyFilter, from our filter map (source: everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1).

To confirm the right filter, note your refrigerator model number and the part number printed on the old filter. Then match those numbers to the listing before you order a replacement.

Filters we compared

1
Frigidaire ULTRAWF PureSource Ultra Refrigerator

Frigidaire ULTRAWF PureSource Ultra Refrigerator

Frigidaire

The Frigidaire ULTRAWF is a genuine OEM replacement filter for Frigidaire refrigerators with the PureSource Ultra system. It uses a carbon block to reduce chlorine taste and odor plus contaminants like lead, nitrates, pesticides, and mercury, and it is certified to NSF/ANSI 42, 53, and 401. Installation is tool-free: push to release the old filter, push the new one until it clicks, and run water for three minutes to prime. A solid choice for owners who want a factory-certified filter and a straightforward swap.

Reasons to buy

  • Genuine Frigidaire filter certified to NSF/ANSI 42, 53, and 401 for chlorine taste and odor, lead, mercury, and other contaminants
  • Tool-free push-to-release and click-in installation with a simple three-minute priming step
  • Carbon block construction (polyethylene and extruded carbon) for reliable filtration
  • WQA certified for sustainability under WQA/ASPE/ANSI S 803

Reasons to avoid

  • Designed only for Frigidaire refrigerators with the PureSource Ultra filter system, so it will not fit other brands or systems
  • The six-month filter reminder light does not reset automatically and must be manually cleared per the refrigerator manual
2
EveryDrop EDR2RXD1 Refrigerator Water Filter

EveryDrop EDR2RXD1 Refrigerator Water Filter

Whirlpool

The EveryDrop EDR2RXD1 is the genuine replacement filter for Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators, certified to NSF 42, 53, and 401 for reducing 70 contaminants including 99 percent of microplastics. Its triple filtration system uses a coconut shell carbon core, and the twist-in design makes replacement straightforward every six months or 200 gallons. A strong pick for owners of those brands who want certified performance and a precise fit rather than a generic substitute.

Reasons to buy

  • Independently certified to three NSF standards (42, 53, and 401), while many generic filters meet only one
  • Reduces 99 percent of microplastics, including particles 60 times smaller than a grain of sand
  • Genuine OEM part designed for a seamless twist-in fit in Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators
  • Triple filtration with a renewable coconut shell based activated carbon core targets large particles, micro-filtration, and microscopic absorption
  • Simple six month or 200 gallon replacement schedule with color and number matching for easy reordering

Reasons to avoid

  • Non-genuine filters may damage the refrigerator, so buyers are locked into the OEM replacement
  • Replacement is recommended every six months, which means recurring cost and maintenance
3
EveryDrop EDR4RXD1 Refrigerator Water Filter

EveryDrop EDR4RXD1 Refrigerator Water Filter

Maytag

The EveryDrop by Whirlpool EDR4RXD1 is the genuine replacement filter for Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators. It is independently certified to NSF 42, 53, and 401, reducing 32 contaminants including 99 percent of microplastics, and uses a coconut shell carbon core with triple filtration. A strong pick for owners of compatible fridges who want verified contaminant reduction and a precise twist-in fit.

Reasons to buy

  • Independently certified to three NSF standards (42, 53, 401), while many generic filters meet only one
  • Reduces 32 contaminants including heavy metals, pesticides, pharmaceuticals, and 99 percent of microplastics
  • Coconut shell based activated carbon core with three stage filtration
  • Genuine OEM part designed for a precise twist-in fit in Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators

Reasons to avoid

  • Non-genuine filters may damage the refrigerator, so buyers are locked into the OEM replacement
  • Replacement is recommended every six months or 200 gallons, adding recurring cost
  • Plastic housing material rather than a more durable alternative
4
AQUACREST AQF-INL Inline Water Filter

AQUACREST AQF-INL Inline Water Filter

AQUACREST

The AQUACREST AQF-INL is a universal inline filter for refrigerator and ice maker lines, rated for 5 years or 5,000 gallons. It uses a 0.5 micron coconut shell carbon block to reduce chlorine, taste, odor, fluoride, rust, and sediment, and comes with both compression and push-to-connect fittings for a no-cut install. A solid pick for households wanting long-lasting, low-maintenance filtration across multiple appliances.

Reasons to buy

  • Long 5-year or 5,000-gallon service life keeps replacement frequency low
  • 0.5 micron coconut shell activated carbon block reduces chlorine, taste, odor, fluoride, rust, and sediment
  • Works with refrigerators, ice makers, coffee makers, RVs, boats, and RO systems, plus compatibility with major fridge brands
  • Includes 1/4 inch compression and push-to-connect fittings, PE tubing, hex nut, sleeve, and insert for a complete install
  • BPA-free and lead-free materials with components reviewed against NSF/ANSI standards

Reasons to avoid

  • Does not reduce total dissolved solids (TDS)
  • Requires inserting the PE tube 20mm into the cartridge to prevent leaks, which adds a step to installation
5
EcoPure EPINL30 5-Year In-Line Water Filter

EcoPure EPINL30 5-Year In-Line Water Filter

EcoPureWaterSolutions

A long-life inline filter for fridges, ice makers, RVs, and under-sink setups, rated to last up to five years. The listing states NSF/ANSI 42 (not yet checked by us). A practical pick for households that want fewer filter swaps and a straightforward DIY install.

Reasons to buy

  • Up to five years of filtration per filter, reducing replacement frequency and long-term cost
  • Universal inline design fits refrigerators from major brands plus ice makers, coffee machines, water coolers, RVs, boats, and RO systems
  • Includes both 1/4-inch compression and push-to-connect fittings for tool-free installation on copper or plastic lines
  • The listing states NSF/ANSI 42 (not yet checked by us).
  • Designed, engineered, and assembled in the USA

Reasons to avoid

  • Plastic construction may be less durable than metal-bodied inline filters in exposed installations
  • 90-day manufacturer warranty is shorter than the advertised five-year filter lifespan
6
everydrop by Whirlpool EDRARXD1 Refrigerator

everydrop by Whirlpool EDRARXD1 Refrigerator

everydrop®

This is the genuine OEM replacement filter for Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators, built around a coconut shell carbon core with three-stage filtration. It carries NSF 42, 53, and 401 certification for reduction of 75 contaminants, including 99 percent of microplastics, which puts it ahead of many generic alternatives that meet only one standard. A solid pick for owners of those brands who want a precise twist-in fit and verified contaminant reduction rather than a cheap third-party cartridge.

Reasons to buy

  • Certified to NSF 42, 53, and 401, covering taste and odor, health-related contaminants, and emerging contaminants in one filter
  • Reduces 75 contaminants including heavy metals, VOCs, pesticides, pharmaceuticals, and 99 percent of microplastics
  • Genuine OEM part engineered for Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators, with a secure twist-in fit
  • Coconut shell based activated carbon core with three-stage filtration for particle capture and microscopic absorption
  • Simple six-month or 200-gallon replacement cycle

Reasons to avoid

  • Genuine OEM filter typically costs more than generic compatible cartridges
  • Only fits refrigerators that take Filter A, so buyers must match the letter and color on their current filter
7
GE MWF Refrigerator Water Filter

GE MWF Refrigerator Water Filter

GE

The GE MWF is a genuine replacement filter for select GE French door, side-by-side, and built-in refrigerators, including GE Profile, Café, and Monogram models. GE product page lists NSF/ANSI 42 and 53; the listing says it reduces over 70 impurities such as lead, chlorine, PFOA/PFOS, microplastics, and five trace pharmaceuticals. Installation is tool-free and does not require shutting off the water, and the filter should be replaced every six months. It suits owners of compatible GE refrigerators who want a certified, guaranteed-fit filter.

Reasons to buy

  • Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, PFOA/PFOS, microplastics, and select pharmaceuticals
  • Guaranteed fit for select GE, GE Profile, Café, and Monogram refrigerators
  • Tool-free installation with no water shutoff required
  • Six-month filter life with Subscribe & Save option for automatic replacement

Reasons to avoid

  • Compatible only with select GE refrigerator models, not universal
  • Requires replacement every six months to maintain filtration performance
8
GE XWFE genuine

GE XWFE genuine

GE

Genuine (OEM) part for the XWFE refrigerator water filter. GE and Waterdrop Amazon listings. XWFE has a built-in chip; the older XWF is a different filter.

9
Frigidaire WF3CB PureSource 3 Water Filter

Frigidaire WF3CB PureSource 3 Water Filter

Frigidaire

The Frigidaire WF3CB is the OEM replacement filter for select Frigidaire refrigerators, using extruded carbon media certified to NSF/ANSI 42 and 53. It reduces chlorine taste and odor, lead, mercury, cysts, and a long list of other contaminants, with a 200-gallon capacity and a push-to-lock installation. A solid pick for owners who want the exact factory filter and straightforward 9-inch fit, not the longer ULTRAWF model.

Reasons to buy

  • NSF/ANSI 42 and 53 certified for aesthetic and health-related contaminant reduction
  • Reduces up to 99% of contaminants including lead, mercury, cysts, pesticides, and pharmaceuticals
  • 200-gallon rated capacity with a filter indicator light
  • Push-to-lock design simplifies replacement
  • Genuine Frigidaire part with authenticity seal on packaging

Reasons to avoid

  • Compatible with only specific Frigidaire models, such as DGUS2635LP, and not the longer ULTRAWF fit
  • Refrigerator reminder light does not reset automatically and must be manually cleared
10
GE RPWFE Refrigerator Water Filter, 1-Pack

GE RPWFE Refrigerator Water Filter, 1-Pack

GE

A genuine GE replacement filter for select French door refrigerators, certified to NSF/ANSI standards to reduce lead, chlorine, PFOA/PFOS, microplastics, and certain pharmaceuticals. It installs without tools or shutting off the water, and GE recommends a fresh filter every six months. A sensible pick for owners of compatible GE, GE Profile, Cafe, and Monogram fridges who want the fit and certification of the original part.

Reasons to buy

  • Certified to NSF/ANSI 42 and 53 according to GE product page; the listing also mentions reduction of 70+ impurities including lead, chlorine, PFOA/PFOS, microplastics, and select pharmaceuticals
  • Guaranteed fit for select GE Appliances French door refrigerators, including GE, GE Profile, Cafe, and Monogram brands
  • Tool-free installation with no need to shut off the water supply
  • Six-month filter life with an optional Subscribe and Save program for automatic replacements
  • Backed by a limited one-year manufacturer warranty

Reasons to avoid

  • Compatibility is limited to select GE French door refrigerator models, so owners of other brands or models will need a different filter
  • Genuine OEM filters typically cost more than third-party alternatives

How to Choose Where Is My Refrigerator Water Filter Located

Start by locating the filter housing, then use the part number on the old filter to find a match. The listings below name specific part numbers and models, so compare those details with your own filter and manual.

Match the part number on the listing

The listing for everydrop by Whirlpool Filter 2 (EDR2RXD1) names EDR2RXD1 and W10413645A, while everydrop by Whirlpool Filter 4 (EDR4RXD1) names EDR4RXD1 and UKF8001AXX. GE MWF genuine names MWF, MWFP, MWFA, GWF and SmartWater, and GE XWFE genuine names XWFE with a built-in chip. Check that the part number on your old filter appears in the listing before you buy.

Check what the listing says about certifications

The everydrop Filter 2 listing says it is certified to NSF/ANSI 42, 53 and 401, and the Filter 4 listing says NSF 42, 53 and 401. GE MWF genuine states NSF 42 and 53, GE XWFE genuine states NSF/ANSI 42, 53 and 401, and Frigidaire ULTRAWF states NSF/ANSI 42, 53 and 401. Where a listing does not state certifications, check the package or the refrigerator manual.

Note the replacement interval the listing gives

Most listings here state a six month interval, such as everydrop Filter 2, everydrop Filter 4, GE MWF genuine, GE XWFE genuine and GE RPWFE genuine. GE MWF genuine adds 300 gallons, GE RPWFE genuine says 170 to 200 gallons depending on the model, and Frigidaire WF3CB states a 200 gallon capacity. The EcoPure EPINL30 and AQUA CREST INL listings describe a five year service life for inline filters.

Consider the filter type and what it fits

Frigidaire ULTRAWF and Frigidaire WF3CB are push to lock filters for Frigidaire systems, and the WF3CB listing notes it is 9 inches long and not the longer ULTRAWF. EcoPure EPINL30 and AQUA CREST INL are inline filters with 1/4 inch fittings for refrigerators, ice makers and other appliances. GE RPWFE genuine notes that a filter without the ID chip will not work, so confirm your model supports the part.

Check pack size and model notes

Most products here are listed as a single filter, while GE RPWFE genuine is also sold as RPWFE2PK, a two pack. The everydrop Filter 4 listing warns that UKF8001 is the older part number for Filter 4 and should not be used on Filter 1 refrigerators. Read the listing notes for your model before ordering.

Check Before You Buy

Find the refrigerator model number on a label inside the fresh food compartment or on the frame behind the door. Use our guide to find your refrigerator model number if you cannot locate the label. Then compare that model and the part number on the old filter with the listing details. You can also use our filter finder to narrow the options.

  1. 1Part on your old filterWhirlpool W10295370APrinted on the cartridge label
  2. 2Same part asEDR1RXD1 (Filter 1)Also sold as W10295370A; everydrop Filter 1
  3. 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: EDR1RXD1 (Filter 1)
How the Whirlpool W10295370A matches the EDR1RXD1 (Filter 1) filter. Diagram: MatchMyFilter, from our filter map (source: everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1).

FAQ

Where is the water filter usually located in a refrigerator?

Common locations are inside the fridge compartment, such as the upper back corner or ceiling, or in the base grille at the bottom front. Some refrigerators use an inline filter on the water line behind the unit. Check your manual for the exact location on your model.

How do I know which filter part number I need?

Look at the part number printed on the old filter and compare it with the numbers named in the listing. For example, the everydrop Filter 2 listing names EDR2RXD1 and W10413645A, and the GE MWF listing names MWF, MWFP, MWFA, GWF and SmartWater. If the numbers do not match, check your refrigerator manual.

What if my refrigerator uses an inline filter?

Inline filters like the EcoPure EPINL30 and AQUA CREST INL are installed on the water line and use 1/4 inch fittings. The listings say they fit many refrigerator brands and other appliances. Confirm the fitting size and the stated service life before you buy.

How often should I replace the filter?

Many listings here state a six month replacement interval, and some add a gallon capacity such as 300 gallons or 200 gallons. The inline filters list a five year service life. Follow the interval in your refrigerator manual and the listing for your specific filter.

Can I use a filter without the chip if my fridge requires one?

The GE RPWFE genuine listing says a filter without the ID chip will not work. If your refrigerator uses that system, choose a filter that the listing says has the chip. Check your manual if you are unsure.

Check before you buy: GE says the XWFE filter uses an RFID sensor that communicates with the refrigerator, and that with no filter, the wrong filter or a non-GE filter the water valve is deactivated. Read our XWFE note before buying a compatible filter.
Check before you buy: GE says refrigerators that use the RPWFE read the filter by radio frequency identification (RFID), that a genuine RPWFE has a visible ID chip under the label, and that a filter without the chip will not work in the refrigerator. A compatible filter that claims a chip is still the seller’s claim, so check the return terms. Source: GE Appliances support.

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

Reasons to Buy and Reasons to Avoid

When selecting a replacement cartridge, base your decision on verifiable specifications rather than marketing claims:

  • Reasons to buy: Genuine or verified compatible filters provide documented reduction of chlorine taste and odor, utilize precision-molded locking tabs that prevent leaks into the refrigerator cabinet, and offer multi-pack bundles that reduce annual replacement expenses.
  • Reasons to avoid: Uncertified cartridges with missing certification marks often fail to seat cleanly, risk cracking internal manifold connections, and do not provide verified lead or cyst filtration.
Next Step: Check the part number printed on your current cartridge or compare your refrigerator model in our Filter Finder before ordering.

More on this topic: Replacing a Refrigerator Water Filter: Steps, Timing and Aftercare

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.