MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

How to Replace a Samsung Refrigerator Water Filter

Part of our guide: Replacing and maintaining a filter ๐Ÿ“Œ Key takeaways Samsung recommends replacing the filter every six months...

๐Ÿ“Œ Key takeaways

  • Samsung recommends replacing the filter every six months and resetting the indicator light each time.
  • Identify your filter model (HAF-CIN, HAF-QIN, or HAFCU1) before buying a replacement.
  • After installing, dispense several gallons of water to clear air and impurities.
  • Use only Samsung Genuine Water Filters; third-party filters may leak or damage the fridge.

Replacing a Samsung refrigerator water filter takes just a few minutes: turn off the water supply, twist out the old filter, twist in a new Samsung Genuine filter until it locks, then dispense several gallons of water and reset the filter light. Samsung recommends a new filter every six months.

Why Replace the Filter on Schedule

A clean water filter is what keeps your Samsung refrigerator dispensing fresh, clean water. Samsung recommends replacing the filter every six months for optimal performance.

Your refrigerator has a built-in water filter light that acts as a reminder for this schedule. It runs on a six-month timer, so it will signal when a change is due. Reset it each time you install a new filter so the timer starts fresh.

Samsung also notes a practical backup check: if the water dispensing speed changes significantly with and without the filter, consider replacing it regardless of what the light shows.

  • Replace every six months per Samsung's recommendation.
  • The filter light runs on a six-month timer.
  • A big change in dispensing speed can also signal a needed change.
Stainless steel side-by-side refrigerator in a bright kitchen with white cabinets
Illustrative photo. Photo by Somalia Veteran on Unsplash

Buy the Right Filter First

Samsung refrigerators are compatible with three specific water filter models: HAF-CIN, HAF-QIN, and HAFCU1. To pick the right one, first find where the filter sits in your refrigerator, since the location varies by model. Consult your user manual if you are not sure where to look.

Then check the model number printed on the existing filter. That number tells you which of the three types you need.

Samsung recommends using only Samsung Genuine Water Filters, available on its official website, for quality and compatibility. Samsung warns that third-party filters may cause leaks and potentially damage your refrigerator.

  • Filter types: HAF-CIN, HAF-QIN, or HAFCU1.
  • Filter location varies by model; check your user manual.
  • Samsung advises against third-party filters.

Step by Step: HAF-CIN and HAF-QIN Filters

These two filter types share the same basic procedure. The whole job should take just a few minutes.

  1. Turn off the water supply.
  2. Locate the filter, open the cover, and rotate the old filter counterclockwise to unlock and remove it.
  3. Remove the protection cap from the new filter.
  4. Insert the new filter into the housing and turn it clockwise until it locks into place.
  5. Align the lock symbol with the indicator line.

Step by Step: HAFCU1 Filters

The HAFCU1 filter uses a slightly different twist motion and alignment mark. Follow the steps below for this type.

  1. Locate the filter and twist it left to unlock and remove it.
  2. Insert the new filter into the housing and twist right to secure it.
  3. Align the notch with the arrow on the housing.

Right After Installation: Flush and Reset

Once the new filter is in, dispense several gallons of water to clear out any impurities or air.

Then reset the water filter indicator light. The reset method depends on your refrigerator model.

On standard models, find the Filter Reset button on the control panel and press and hold it for three seconds. On Family Hub models, go to Apps, then tap Fridge Manager, then Fridge Settings. Select Water Filter and tap Reset.

On models with arrow buttons, use the arrows to navigate to More Options and tap Filter Reset. On the RF4289 and RSG309 models, open Settings, tap Water Filter, and hold Reset until the status changes.

  • Standard models: hold Filter Reset for three seconds.
  • Family Hub: Apps > Fridge Manager > Fridge Settings > Water Filter > Reset.
  • Arrow buttons: More Options > Filter Reset.
  • RF4289 and RSG309: Settings > Water Filter > hold Reset.

What the Filters Are Rated For

Samsung water filters meet NSF/ANSI standards 42, 53, and 401. That means they are designed to reduce a range of contaminants from your drinking water, including chlorine, lead, mercury, and emerging contaminants such as pharmaceuticals.

If you run into trouble installing a new filter, Samsung points owners to its troubleshooting guide or to Samsung support for further help.

What to check for your model

Filter location, the exact replacement steps, and the light reset method vary by refrigerator model, so check your user manual for your specific unit. This guide covers only what Samsung's support page states and does not address every model.

Next step

Clear glass of water with ice cubes
Illustrative photo. Photo by Giorgio Trovato on Unsplash

โ” FAQ

How often should I replace the water filter in my Samsung refrigerator?

Samsung recommends replacing it every six months for optimal performance. The filter indicator light runs on a six-month timer as a reminder, and you should reset it each time you install a new filter.

Which filter do I need for my Samsung refrigerator?

Samsung refrigerators use one of three filter models: HAF-CIN, HAF-QIN, or HAFCU1. Find your filter's location in the fridge, then check the model number on the existing filter to see which one you need.

Why does the water flow slowly after I install a new filter?

Air and impurities can be left in the line after a filter change. Samsung says to dispense several gallons of water after installation to clear them out. If dispensing speed changes significantly with and without the filter, consider replacing it.

Sources

This article was written by the MatchMyFilter editorial team from manufacturer support pages. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

Find the right filter for your model

Samsung uses different filter codes for different models, so match the code on your current filter or your model number first. Use the filter finder to look up your model number.

Not sure which one you have? Our guide to finding your refrigerator model number shows where to look.

More on this topic: Replacing a Refrigerator Water Filter: Steps, Timing and Aftercare

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.