Whirlpool EDR1RXD1 vs EDR2RXD1: Which Filter Fits
Whirlpool EDR1RXD1 and EDR2RXD1 are two different filters for different refrigerators. Check your model number and the part number on your old filter before you order.
Part of our guide: OEM vs compatible and part comparisons
Whirlpool EDR1RXD1 and EDR2RXD1 are not interchangeable. They are two separate filter part numbers, and the right one depends on the refrigerator model you own. The EDR1RXD1 is also sold as W10295370A, while the EDR2RXD1 is also sold as W10413645A, according to the listings.
Before you order, find your refrigerator model number and check the part number printed on the filter you are replacing. The listings below name the part numbers and models each filter is made for, so you can match them to your own appliance.
Filters we compared for EDR1RXD1
EveryDrop EDR2RXD1 Refrigerator Water Filter
The EveryDrop EDR2RXD1 is the genuine replacement filter for Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators, certified to NSF 42, 53, and 401 for reducing 70 contaminants including 99 percent of microplastics. Its triple filtration system uses a coconut shell carbon core, and the twist-in design makes replacement straightforward every six months or 200 gallons. A strong pick for owners of those brands who want certified performance and a precise fit rather than a generic substitute.
Reasons to buy
- Independently certified to three NSF standards (42, 53, and 401), while many generic filters meet only one
- Reduces 99 percent of microplastics, including particles 60 times smaller than a grain of sand
- Genuine OEM part designed for a seamless twist-in fit in Whirlpool, Maytag, KitchenAid, Amana, and JennAir refrigerators
- Triple filtration with a renewable coconut shell based activated carbon core targets large particles, micro-filtration, and microscopic absorption
- Simple six month or 200 gallon replacement schedule with color and number matching for easy reordering
Reasons to avoid
- Non-genuine filters may damage the refrigerator, so buyers are locked into the OEM replacement
- Replacement is recommended every six months, which means recurring cost and maintenance
GLACIER FRESH GF-370 Refrigerator Water Filter
A three-pack of coconut shell carbon block filters made to replace Whirlpool W10295370A and EDR1RXD1 cartridges. The listing states a certification (not yet checked by us). A sensible pick for owners of compatible Whirlpool and Maytag refrigerators who want a year and a half of filtration in one order.
Reasons to buy
- Three-pack covers roughly 18 months of use at the rated six-month, 200-gallon interval
- Coconut shell carbon block construction targets impurities and off-tastes
- Broad compatibility list covers many Whirlpool and Maytag refrigerator models and common part numbers
- The listing states a certification (not yet checked by us).
- Compact 2.2 by 7.4 inch profile fits the intended filter housing
Reasons to avoid
- Compatibility is limited to the specific refrigerator models and part numbers listed, so buyers must verify their model before ordering
- Plastic housing construction rather than a more robust material
everydrop by Whirlpool Filter 1 (EDR1RXD1)
Genuine (OEM) part for the EDR1RXD1 (Filter 1) refrigerator water filter. everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1.
How to choose between Whirlpool EDR1RXD1 vs EDR2RXD1
Part numbers and what each listing names
The everydrop by Whirlpool Filter 2 (EDR2RXD1) listing names the EDR2RXD1 part number and also lists W10413645A as a replacement number. The everydrop by Whirlpool Filter 1 (EDR1RXD1) listing names EDR1RXD1 and W10295370A. The GLACIER FRESH EDR1RXD1 Water Filter Compatible listing names W10295370, W10295370A, W10276924, W10291030, P4RFWB, P5WB2L, 46-9930, 46-9081, FILTER 1, EDR1RXD1, EDR1RXD1B, WHR1RXD1 and KAD1RXD1 as compatible part numbers.
Certifications stated in the listings
The everydrop Filter 2 listing states NSF/ANSI 42, 53 and 401 certification. The everydrop Filter 1 listing states NSF 42, 53 and 401 certification. The GLACIER FRESH listing does not state a certification in the listing information we checked, so check the listing and your refrigerator manual if certification matters to you.
Replacement interval and pack size
Both everydrop listings state a replacement interval of 6 months. The GLACIER FRESH listing says the filter can be used for 6 months or 200 gallons. The GLACIER FRESH product is sold as a 3 pack, while the everydrop listings do not state a pack size in the listing information we checked.
What each listing says it fits
The everydrop Filter 1 listing says it fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1. The GLACIER FRESH listing names specific refrigerator models such as GSC25C4EYB00, GSC25C5EYW00 and GSC25C6EYB01, and states compatibility with the part numbers listed above. The everydrop Filter 2 listing does not name specific refrigerator models in the listing information we checked, so check the listing and your manual for your model.
Genuine part or compatible replacement
The two everydrop filters are described as genuine OEM parts for their respective part numbers. The GLACIER FRESH filter is described as a compatible replacement for EDR1RXD1 and the part numbers it lists. If you want the part number that matches your refrigerator exactly, start with the OEM listing for that number.
Check before you buy
Find the model number plate inside your refrigerator, usually on the ceiling of the fresh food compartment or behind a drawer. Our guide to finding your refrigerator model number walks through where to look for Whirlpool models. Then compare that model number and the part number on your old filter with the numbers named in each listing. You can also use our filter finder to narrow down the part number for your model.
FAQ
Are EDR1RXD1 and EDR2RXD1 interchangeable?
No. They are separate part numbers with different replacement numbers, W10295370A for EDR1RXD1 and W10413645A for EDR2RXD1. Use the part number that matches your refrigerator model and your old filter.
How do I know which one my Whirlpool refrigerator uses?
Check the model number plate on your refrigerator and the part number printed on the filter you are removing. Compare both with the numbers named in the listings above, or check your refrigerator manual.
Does the GLACIER FRESH filter replace EDR2RXD1?
The GLACIER FRESH listing provided here names EDR1RXD1 and related part numbers, not EDR2RXD1. Check the listing carefully and confirm against your manual before buying.
How often should I replace the filter?
The everydrop listings state a 6 month replacement interval, and the GLACIER FRESH listing says 6 months or 200 gallons. Follow the interval in your refrigerator manual if it differs.
What if the new filter does not fit?
Recheck the part number on the filter you removed against the listing. Our guide to what to check when a new filter will not fit covers common fit and light reset issues.
How to Match the Filter to Your Refrigerator Model
The safest way to choose between these two filters is to work from your refrigerator model number and the part number on the old filter, not from the filter name alone. The everydrop Filter 1 listing says it fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1, so the phrase that matters is the filter number your appliance calls for.
The GLACIER FRESH listing takes a different approach and names specific refrigerator models, including GSC25C4EYB00, GSC25C5EYW00 and GSC25C6EYB01, along with a long list of compatible part numbers. If your model appears in that list, the listing is telling you the filter is meant for it. If your model does not appear, do not assume it fits.
Read the Old Filter Before You Shop
Take out the filter you are replacing and read the part number printed on it. Compare that number with the numbers named in each listing. The everydrop Filter 2 listing names EDR2RXD1 and W10413645A, while the everydrop Filter 1 listing names EDR1RXD1 and W10295370A. A match on either number is a strong sign you are looking at the right product.
Use the Model Plate as a Backup Check
The model number plate is usually inside the fresh food compartment, often on the ceiling or behind a drawer. Our guide to finding your refrigerator model number explains where to look. Write the model number down and compare it with the models named in the listings before you order.
What to Check Before You Buy
Before ordering, confirm three things: the part number on your old filter, the model number of your refrigerator, and whether the listing describes the product as a genuine OEM part or a compatible replacement. The two everydrop filters are described as genuine OEM parts for their own part numbers. The GLACIER FRESH filter is described as a compatible replacement for EDR1RXD1 and the part numbers it lists.
Also check the pack size and the stated replacement interval. The GLACIER FRESH product is sold as a 3 pack, while the everydrop listings do not state a pack size in the listing information we checked. Both everydrop listings state a 6 month replacement interval, and the GLACIER FRESH listing says 6 months or 200 gallons.
Do Not Assume a Compatible Filter Covers Both Numbers
The GLACIER FRESH listing provided here names EDR1RXD1 and related part numbers, not EDR2RXD1. If your refrigerator calls for the Filter 2 number, that listing does not claim to replace it. Check the listing text carefully rather than relying on a general claim that a filter fits Whirlpool refrigerators.
Keep the Packaging Until the Filter Is Installed
Hold on to the packaging and any paperwork until the new filter is in place and the water runs clear. If the filter does not seat properly, you can recheck the part number against the listing and your manual. Our guide to what to check when a new filter will not fit covers common fit and light reset issues.
How to Read Fit and Certification Claims
Fit claims come from different places. The everydrop Filter 1 listing says it fits models that use Filter 1, which points you back to your own appliance. The GLACIER FRESH listing names specific refrigerator models and part numbers. Treat each claim as a starting point and confirm it against your model number and old filter.
Certification claims also differ. The everydrop Filter 2 listing states NSF/ANSI 42, 53 and 401 certification, and the everydrop Filter 1 listing states NSF 42, 53 and 401 certification. The GLACIER FRESH listing does not state a certification in the listing information we checked, so check the listing and your refrigerator manual if certification matters to you.
When to Replace the Filter
The everydrop listings state a 6 month replacement interval, and the GLACIER FRESH listing says 6 months or 200 gallons. Follow the interval in your refrigerator manual if it differs. A reminder on the calendar helps you stay on schedule.
Common Mistakes to Avoid
The most common mistake is buying by brand name alone instead of by part number. Another is assuming the two everydrop numbers can stand in for each other. They cannot. A third is skipping the model number check and ordering from memory. Confirm the number on the old filter and the model plate before you buy.
This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.
More on this topic: OEM vs Compatible Refrigerator Water Filters: Part Comparisons by Brand
Related guides
- Whirlpool EDR4RXD1 vs EDR1RXD1: Which Filter Fits
- Whirlpool EDR1RXD1 vs EDR3RXD1: Which Filter Fits
- Refrigerator Water Filter for Old Refrigerator: How to Match
All Whirlpool filter guides · Find your filter by model number
Browse all refrigerator water filter guides
