MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

Samsung DA29-00003G HAF-CU1 Review: What to Check

A careful look at the Waterdrop WD-F11B replacement for the Samsung DA29-00003G and HAF-CU1 filter. Learn how to match the part number to your refrigerator before you buy.

The Waterdrop WD-F11B is a replacement filter its listing names for both Samsung DA29-00003G and HAF-CU1, along with a long list of related part numbers. Confirm the part number on the filter you are replacing and your refrigerator model number before you order.

If you are searching for a Samsung DA29-00003G HAF-CU1 review, the short answer is that the Waterdrop WD-F11B is a replacement filter the listing names for both part numbers. The listing also says it fits a long list of related Samsung and aftermarket part numbers, so the key step is confirming your own filter number before ordering.

  1. 1Part on your old filterSamsung DA97-17376BPrinted on the cartridge label
  2. 2Same part asHAF-QIN/EXPAlso sold as DA97-17376B; DA97-08006C
  3. 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: HAF-QIN/EXP
How the Samsung DA97-17376B matches the HAF-QIN/EXP filter. Diagram: MatchMyFilter, from our filter map (source: Samsung/Waterdrop Amazon listings and reseller compatibility lists).

Before you buy, check the part number printed on the filter you are replacing and the model number of your refrigerator. The listing is the source for compatibility claims, and your refrigerator manual is the final check for the correct filter.

Filters we compared for DA29-00003G

1
Waterdrop WD-F11B Samsung DA29-00003G Filter

Waterdrop WD-F11B Samsung DA29-00003G Filter

Waterdrop

A three-pack replacement for Samsung DA29-00003G and a long list of compatible models, built around a coconut shell carbon block that targets chlorine, taste, odor, rust, and sediment. The listing states NSF/ANSI 42 and 372 (not yet checked by us). The listing states a certification (not yet checked by us).

Reasons to buy

  • Coconut shell carbon block with a larger surface area and more micropores than standard charcoal, aimed at reducing chlorine, turbidity, taste, odor, rust, and sediment
  • The listing states NSF/ANSI 42 and 372 (not yet checked by us).
  • Broad compatibility list covers many Samsung DA29-00003G variants and third-party part numbers
  • Three-pack with monthly install stickers and a user manual included
  • Lead-free, food-grade materials

Reasons to avoid

  • Filter life is capped at 6 months or 300 gallons, so heavy-use households will go through the pack quickly
  • Compatibility depends on matching your exact fridge model against the long part-number list before ordering

How to Choose a Samsung DA29-00003G HAF-CU1 Review Pick

Part numbers and models the listing names

The listing says the Waterdrop WD-F11B replaces Samsung DA29-00003G, Aqua-Pure Plus, DA29-00003A, DA97-06317A, HAFIN2, FMS-1, RF267AERS, RF268ABRS, DA61-00159, DA29-00003D, HAFCU1/XAA, HAFIN2/EXP, DA29-00003, DA29-00003A-B, DA61-00159A, DA61-00159A-B, DA61-159, and AP4444333. It also names aftermarket numbers such as WF-DA29-00003G, RWF1010, RWF1100A, GF-03G, PL-700, CWMF022, EFF-6011A, FL-RF11, AQF-FF11B, WS611B, MB-F11B, WF289, and CLCH103. Compare these to the number on your old filter and to your refrigerator manual.

Certifications the listing states

The seller states that the WD-F11B has WRAS approval, which the listing describes as testing under the UK Water Fittings Regulations and Scottish Byelaws. The listing also says the filter holds NSF 42 and NSF 372 certificates. These are listing statements, so check the current product page if certification details matter to you.

Replacement interval and pack size

The listing says the filter life is 6 months or 300 gallons, and that this varies with water conditions. It also says the pack includes monthly install stickers to help you track the lifespan. This product is sold as a 3 pack, so the listing describes three filters in one order.

What the listing says it fits

The listing presents the WD-F11B as a replacement for the Samsung DA29-00003G and HAF-CU1 family and the related numbers above. It does not list every refrigerator model, so the reader should check the listing and the refrigerator manual. If your model is not named, confirm the filter number before buying.

Filtration claims in the listing

The seller states that the filter uses coconut shell carbon block and reduces chlorine, taste and odor, and other suspended particles tested by a third-party laboratory. The listing also mentions turbidity, rust, and sediment. These are seller statements, and the listing is the place to confirm current wording.

Check Before You Buy

Find the refrigerator model number on the label inside the fresh food compartment or on the frame, and write it down exactly. Then find the filter part number printed on the old filter or in the manual. Match both to the numbers the listing names, and use our guide to find your refrigerator model number if you need help. You can also use the filter finder to check a match before ordering.

How We Choose What to List

We read manufacturer and listing information to decide what appears in our guides. We do not run lab tests, and we rely on the stated part numbers and certifications for the details shown here.

How to Match the Filter to Your Refrigerator Model

Matching a replacement filter starts with two pieces of information: the part number printed on the filter you are removing and the model number of your refrigerator. The listing names a long set of Samsung and aftermarket numbers, but it does not name every refrigerator model, so the manual and the old filter are the practical checks. Write both numbers down exactly as printed, including any suffix letters, because the listing distinguishes between closely related numbers.

Once you have both numbers, compare them against the replacement list in the listing. If your filter number appears, that is a good sign, but the refrigerator manual remains the final word on the correct filter for your appliance. If the number on your old filter does not appear at all, treat the match as unconfirmed and check further before ordering.

Where to Find the Model and Filter Numbers

The refrigerator model number is usually on a label inside the fresh food compartment or on the frame, and the filter part number is printed on the old filter itself or listed in the manual. Our guide to finding your refrigerator model number walks through the label locations if you cannot spot it.

Using the Filter Finder

The filter finder is a quick way to check a match before ordering. Have your model number and old filter number ready so you can compare them against what the listing names.

What to Check Before You Buy

Before ordering, confirm the pack size and the replacement interval the listing states. The product is sold as a 3 pack, so one order describes three filters, and the listing gives a filter life of 6 months or 300 gallons that varies with your water conditions. The listing also says monthly install stickers are included to help track the lifespan.

Certification details are worth a look as well. The seller states WRAS approval and NSF 42 and NSF 372 certificates, and these are listing statements rather than independent findings. If certifications matter to you, confirm the current wording on the product page before you buy.

Reading Fit and Certification Claims

Compatibility and certification claims come from the listing, so read them as seller statements. The listing is the place to confirm current wording, and your refrigerator manual is the final check on fit.

Common Mistakes to Avoid

A common mistake is ordering from memory instead of copying the number printed on the old filter. Assuming a replacement part will fit without checking the refrigerator manual can lead to problems. Taking a minute to compare both numbers prevents most ordering errors.

When to Replace the Filter

The listing states a filter life of 6 months or 300 gallons, whichever comes first, and notes that this varies with water conditions. The included monthly stickers are meant to help you keep track, so mark the install month and check the sticker when you are unsure how long the filter has been in use.

The listing also notes that expired replacement filters might allow pollutants to accumulate, which is the practical reason to stay on schedule. If you are unsure whether your filter is due, compare the install date against the stated interval and replace it when either limit is reached.

Tracking the Interval

Use the monthly install stickers from the pack to record when each filter went in. With a 3 pack on hand, a spare is ready when the interval comes up.

Signs It Is Time

The listing ties filter life to time and volume rather than to taste alone. When either the 6 month or 300 gallon mark arrives, replace the filter according to the listing.

  1. 1Part on your old filterSamsung DA29-00020BPrinted on the cartridge label
  2. 2Same part asHAF-CIN/EXPAlso sold as DA29-00020B; DA29-00020A
  3. 3ReplaceEvery 6 months or 300 gallonsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: HAF-CIN/EXP
How the Samsung DA29-00020B matches the HAF-CIN/EXP filter. Diagram: MatchMyFilter, from our filter map (source: Amazon listings and reseller compatibility lists. HAF-CIN does not fit HAF-QIN refrigerators).

FAQ

Does the Waterdrop WD-F11B replace the Samsung DA29-00003G and HAF-CU1?

The listing says it replaces Samsung DA29-00003G, HAFCU1/XAA, and many related part numbers. Check your own filter number and manual to confirm the match.

How often does the listing say to replace the filter?

The listing states a filter life of 6 months or 300 gallons, varying with water conditions. The included monthly stickers are meant to help you track that interval.

What certifications does the listing mention?

The seller states WRAS approval and NSF 42 and NSF 372 certificates. These are listing statements, so confirm them on the current product page if needed.

How many filters are in the pack?

The product name says 3 Pack, so the listing describes three filters. Check the listing for current pack details before ordering.

What if my refrigerator model is not in the list?

The listing names many part numbers but not every refrigerator model. Check your refrigerator manual and the listing, and use our filter finder to confirm before you buy.

This article was written by the MatchMyFilter editorial team from manufacturer and listing information. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

Reasons to Buy and Reasons to Avoid

When selecting a replacement cartridge, base your decision on verifiable specifications rather than marketing claims:

  • Reasons to buy: Genuine or verified compatible filters provide documented reduction of chlorine taste and odor, utilize precision-molded locking tabs that prevent leaks into the refrigerator cabinet, and offer multi-pack bundles that reduce annual replacement expenses.
  • Reasons to avoid: Uncertified cartridges with missing certification marks often fail to seat cleanly, risk cracking internal manifold connections, and do not provide verified lead or cyst filtration.
Next Step: Check the part number printed on your current cartridge or compare your refrigerator model in our Filter Finder before ordering.

More on this topic: OEM vs Compatible Refrigerator Water Filters: Part Comparisons by Brand

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.