MatchMyFilter is supported by readers. When you buy through our links we may earn a commission at no cost to you. As an Amazon Associate I earn from qualifying purchases. Learn more›

Whirlpool Refrigerator Cloudy Water: Causes and Fixes

Part of our guide: Choosing and matching a filter ๐Ÿ“Œ Key takeaways Cloudy dispensed water is most often harmless suspended...

๐Ÿ“Œ Key takeaways

  • Cloudy dispensed water is most often harmless suspended air bubbles
  • A new filter or plumbing work can push air into the water system
  • Flushing the lines after a filter change is the main fix Whirlpool recommends
  • Whirlpool advises replacing the filter every 6 months or when the indicator turns on

Whirlpool says cloudy water from a refrigerator dispenser is usually caused by tiny air bubbles trapped in the water line, often after a filter change or a plumbing change. Fill a clear glass and let it sit; if the water clears from the bottom up, air is the likely cause. Flushing the system as Whirlpool describes usually clears it.

What Cloudy Water Usually Means

If the water from your Whirlpool refrigerator dispenser looks milky or hazy, the most common explanation is air. Whirlpool says tiny air bubbles suspended in the water scatter light and make the water appear opaque, which reads as cloudiness in the glass.

Whirlpool offers a simple test. Fill a clear glass and let it stand for a minute. If the haze clears from the bottom upward as the bubbles rise, air is the likely cause. That kind of cloudiness is normal and typically fades shortly after pouring.

Air can get into the water line in several everyday ways. Whirlpool lists household plumbing changes, pressure fluctuations, and a newly installed filter as common entry points. Chilled water can also hold dissolved gases that come out as fine bubbles when dispensed.

  • Cloudiness that rises out of the glass points to air
  • Cloudiness that stays put may point to something else
  • Air in the line is described by Whirlpool as normal
  1. 1Part on your old filterWhirlpool W10295370APrinted on the cartridge label
  2. 2Same part asEDR1RXD1 (Filter 1)Also sold as W10295370A; everydrop Filter 1
  3. 3ReplaceEvery 6 monthsSooner if flow slows or taste changes
  4. 4Before you orderMatch the part numberOn the box or listing: EDR1RXD1 (Filter 1)
How the Whirlpool W10295370A matches the EDR1RXD1 (Filter 1) filter. Diagram: MatchMyFilter, from our filter map (source: everydrop and Waterdrop Amazon listings. Fits Whirlpool, Maytag, Amana, KitchenAid and JennAir models that use Filter 1).

Why a New Filter Often Causes Cloudiness

A filter change is one of the most frequent triggers. When you install a new water filter, air gets trapped in the refrigerator water system. As water moves through the fresh filter and the lines, that air is pushed out as tiny bubbles, so the water looks cloudy for a while.

New filters can also shed a small amount of harmless carbon fines from the filter media. Whirlpool says to use everydrop brand filters or the filter specified for your model so the fit and performance are correct.

Whirlpool states plainly that cloudy water right after a filter change is normal when you use the dispenser for the first time or after replacing the filter. Flushing the water system is the step that resolves it.

How to Flush the Water System

Flushing is needed whenever the filter is changed or installed. Whirlpool says flushing reduces excess air, prepares the filter for use, and removes excess carbon. It also notes that air in the system can cause dripping at the dispenser, small or hollow ice cubes, or a cloudy appearance.

The amount of water needed varies by filter. Whirlpool says some filters require 1, 2, or 4 gallons dispensed for a proper flush, and points owners to the water filter instructions for the specific guideline. Check your Use and Care Guide for model-specific directions.

If your refrigerator has no internal or external dispenser, Whirlpool gives a different method. After connecting to a water source or replacing the filter, fill and discard three full ice containers to prepare the filter and remove some loose carbon.

  1. Install the correct filter for your model
  2. Dispense and discard water per your filter instructions, which may call for 1, 2, or 4 gallons
  3. Watch the stream for dripping or sputtering as air works its way out
  4. Check ice cubes for small or hollow shapes, another sign of trapped air
  5. If there is no dispenser, fill and discard three full ice containers instead

Telling Cloudiness Apart From Discoloration

Whirlpool's guide separates cloudiness from discoloration, and the glass test is the practical way to do it. Cloudiness from air tends to clear on its own as bubbles rise. Water that stays hazy or carries a color is a different question and is not the same as the air bubble haze Whirlpool describes.

Water quality at the source also matters. Whirlpool says impurities or dissolved substances in the water feeding the ice maker can carry into the ice and affect flavor. The company recommends everydrop filters to help remove contaminants including lead, chlorine, pesticides, and pharmaceuticals.

Whirlpool also has a warning about softened water. The company strongly recommends against connecting the ice maker to a softened water source, because the chemicals used in softeners, particularly salt, can damage internal components and give ice a salty or chemical taste. If softened water cannot be avoided, Whirlpool says to make sure the softener works correctly and is well maintained.

When to Replace the Filter

If cloudiness keeps coming back, look at the filter's age. Whirlpool recommends replacing the Whirlpool water filter every 6 months, when the indicator light comes on, or as needed. Usage and water quality can mean more frequent changes.

Whirlpool notes that a clogged or improperly installed filter can reduce water flow to the ice maker and dispenser, which may show up as low ice production and slower water flow. A filter that is seated correctly and changed on schedule supports a steady supply of cleaner, fresher tasting water.

  • Change the filter every 6 months, when the light comes on, or as needed
  • A clogged or poorly seated filter can slow water and ice production
  • Whirlpool recommends everydrop filters for its refrigerators

What to check for your model

Flush volumes and procedures vary by filter and model, so confirm the exact amount in your filter instructions or Use and Care Guide. Whirlpool's page does not cover every possible cause of cloudy or discolored water, such as problems with your home's water supply.

Next step

Waterdrop wallpaper
Illustrative photo. Photo by Herbert Goetsch on Unsplash

โ” FAQ

Is cloudy water from a Whirlpool refrigerator safe to drink?

Whirlpool describes the haze as coming from harmless air bubbles introduced during normal operation or after a filter change. The company's guidance treats this as normal and says it typically dissipates shortly after pouring. If the water does not clear or looks discolored rather than cloudy, that is a separate issue from the air bubble haze Whirlpool explains.

How much water should I run through a new filter?

It depends on the filter. Whirlpool says some filters require 1, 2, or 4 gallons to be dispensed for a proper flush, and directs owners to the water filter instructions for the specific guideline. If your refrigerator has no dispenser, Whirlpool says to fill and discard three full ice containers instead.

Why does the water look cloudy only right after I change the filter?

Whirlpool says installing a new filter introduces trapped air into the water system, and that air comes out as tiny bubbles as water moves through the filter and lines. New filters may also release a small amount of harmless carbon fines. Whirlpool calls this normal and says flushing the system helps resolve it.

Sources

This article was written by the MatchMyFilter editorial team from manufacturer support pages. We do not run lab tests. As an Amazon Associate I earn from qualifying purchases.

More on this topic: How to Choose and Match a Refrigerator Water Filter

About the author

Ethan Marlowe
Ethan Marlowe

Ethan Marlowe is the Lead Technical Editor and Appliance Filtration Specialist at MatchMyFilter. He specializes in home appliance maintenance, water filtration mechanics, and independent verification of NSF/ANSI standards (NSF 42, 53, and 401) across major US refrigerator brands.